hwAclMplsSubitem
HUAWEI-ACL-MIB ·
.1.3.6.1.4.1.2011.5.1.1.18.1.2
Object
column
SNMPv2-SMIUnsigned32
The objects specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created.
Context
- MIB
- HUAWEI-ACL-MIB
- OID
.1.3.6.1.4.1.2011.5.1.1.18.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwAclMplsRuleEntry
- Table
- hwAclMplsRuleTable
- Siblings
- 21
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclMplsAclNum The index of mpls acl group, the index range is (10000..10999 | 42768..76535). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.18.1.1 |
| hwAclMplsLabel3 The value of this object identifies the Label value in the third label of an MPLS packet.
The value ranges from 0 to 1048575. The default value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.10 |
| hwAclMplsLabel4 The value of this object identifies the Label value in the fourth label of an MPLS packet.
The value ranges from 0 to 1048575. The default value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.11 |
| hwAclMplsTTLOP1 The object indicates the ttl operation symbol of a mpls
acl rule. It compares the operators of ttl value.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'rang… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.18.1.12 |
| hwAclMplsTTL1Begin The object indicates the begin value of a mpls ttl. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.13 |
| hwAclMplsTTL1End The object indicates the end value of a mpls ttl. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.14 |
| hwAclMplsTTLOP2 The object indicates the ttl operation symbol of a mpls
acl rule. It compares the operators of ttl value.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'rang… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.18.1.15 |
| hwAclMplsTTL2Begin The object indicates the begin value of a mpls ttl. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.16 |
| hwAclMplsTTL2End The object indicates the end value of a mpls ttl. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.17 |
| hwAclMplsTTLOP3 The object indicates the ttl operation symbol of a mpls
acl rule. It compares the operators of ttl value.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'rang… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.18.1.18 |
| hwAclMplsTTL3Begin The object indicates the begin value of a mpls ttl. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.19 |
| hwAclMplsTTL3End The object indicates the end value of a mpls ttl. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.20 |
| hwAclMplsRowStatus RowStatus, Now support three value: CreateAndGo, Active and Destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.1.1.18.1.21 |
| hwAclMplsCount The object indicates the statistics of matched packets by the rule. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.1.1.18.1.22 |
| hwAclMplsAct The object indicates the action of a basic acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.18.1.3 |
| hwAclMplsExp1 The value of this object identifies the EXP value in the first label of an MPLS packet.
The value ranges from 0 to 7. The default value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.4 |
| hwAclMplsExp2 The value of this object identifies the EXP value in the second label of an MPLS packet.
The value ranges from 0 to 7. The default value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.5 |
| hwAclMplsExp3 The value of this object identifies the EXP value in the third label of an MPLS packet.
The value ranges from 0 to 7. The default value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.6 |
| hwAclMplsExp4 The value of this object identifies the EXP value in the fourth label of an MPLS packet.
The value ranges from 0 to 7. The default value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.7 |
| hwAclMplsLabel1 The value of this object identifies the Label value in the first label of an MPLS packet.
The value ranges from 0 to 1048575. The default value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.8 |
| hwAclMplsLabel2 The value of this object identifies the Label value in the second label of an MPLS packet.
The value ranges from 0 to 1048575. The default value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.18.1.9 |