hwAclIfSubitem
HUAWEI-ACL-MIB ·
.1.3.6.1.4.1.2011.5.1.1.6.1.2
Object
column
SNMPv2-SMIUnsigned32
The object specifies the number of an ACL rule. If the number specified has been assigned to an ACL rule, the new rule will overwrite the old one, which is equal to editing the old rule. If the number is not assigned, the system will define a rule with the number and insert it to the place corresponding to its number. If no number is specified, the system will define a rule, assign a number to it and add it into the ACL. It will be placed at the end of the ACL when configuration sequence is adopted; otherwise, it will be placed based on the 'Depth-first' principle. When ACL rules are following the 'Depth-first' principle, the number of an ACL rule must be given 0, but it will be assigned by step automatically; otherwise, this rule will not be created.
Context
- MIB
- HUAWEI-ACL-MIB
- OID
.1.3.6.1.4.1.2011.5.1.1.6.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwAclIfRuleEntry
- Table
- hwAclIfRuleTable
- Siblings
- 10
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclIfAclNum The index of interface-based acl group, the index range is (1000..1999 | 42768..76535). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.6.1.1 |
| hwAclIfRowStatus RowStatus,Now support three state:CreateAndGo,Active,Destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.1.1.6.1.11 |
| hwAclIfDescription The object indicates the description of this if rule.
The object describes the usage of an ACL with a word or a sentence. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.6.1.12 |
| hwAclIfAct The object indicates the action of an interface-based acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the co… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.6.1.3 |
| hwAclIfIndex The object indicates the index of an interface.
It specifies the interface information of the packets.The invalid
interface index is 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.6.1.4 |
| hwAclIfAny The object indicates whether or not matching any interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.6.1.5 |
| hwAclIfTimeRangeIndex The value of this object identifies the index of the time
range during which an ACL rule can be applied. When the current
time is in the time range, the rule is valid. The value… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.6.1.6 |
| hwAclIfLog The object indicates whether to log the matched packets.
The log contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.6.1.7 |
| hwAclIfEnable The object indicates whether the rule is valid or invalid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.6.1.8 |
| hwAclIfCount The object indicates the statistics of matched packets by the rule. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.1.1.6.1.9 |