hwAclAppliedRowStatus
HUAWEI-ACL-MIB ·
.1.3.6.1.4.1.2011.5.1.1.15.1.51
Object
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Context
- MIB
- HUAWEI-ACL-MIB
- OID
.1.3.6.1.4.1.2011.5.1.1.15.1.51- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAclAppliedEntry
- Table
- hwAclAppliedTable
- Siblings
- 33
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclAppliedOperation The actions taken when packets conforming or exceeding the configured. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.1 |
| hwAclAppliedStatCount The object indicates the statistics of matched packets by the policy.
When action is statistic or limit, this field is valid. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.1.1.15.1.10 |
| hwAclAppliedLimitCir Committed information rate. Unit: kbps. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.11 |
| hwAclAppliedLimitPir Peak information rate. Unit: kbps.
0 is the default value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.12 |
| hwAclAppliedLimitCbs Committed burst size. Unit: byte.
0 is the default value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.13 |
| hwAclAppliedLimitPbs Peak burst size. Unit: byte.
0 is the default value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.14 |
| hwAclAppliedLimitGreenAction Green action. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.15 |
| hwAclAppliedLimitGreenValue The value is to remark When green action is remarking.
For remarking DSCP, the range is 0~63;
For remarking 8021p, the range is 0~7. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.16 |
| hwAclAppliedLimitYellowAction Yellow action. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.17 |
| hwAclAppliedLimitYellowValue The value is to remark When yellow action is remarking.
For remarking DSCP, the range is 0~63;
For remarking 8021p, the range is 0~7. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.18 |
| hwAclAppliedLimitRedAction Red action. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.19 |
| hwAclAppliedScopeType The scope that ACL apply on. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.2 |
| hwAclAppliedLimitRedValue The value is to remark When red action is remarking.
For remarking DSCP, the range is 0~63;
For remarking 8021p, the range is 0~7. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.20 |
| hwAclAppliedMirrObservedPort The mirror observe port number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.15.1.21 |
| hwAclAppliedMirrRspanVlan The object specifies the RSPAN vlan.
0 means mirror to local port. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.22 |
| hwAclAppliedRedirectIfIndex The redirect output interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.15.1.23 |
| hwAclAppliedRedirectIpAddr The redirect IP next hop address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.15.1.24 |
| hwAclAppliedRedirectIpv6Addr The redirect IPv6 next hop address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.1.1.15.1.25 |
| hwAclAppliedRemarkVlan The remarked vlan ID. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.26 |
| hwAclAppliedRemarkCVlan The remarked ce-vlan ID. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.27 |
| hwAclAppliedRemark8021p The remarked 8021p value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.28 |
| hwAclAppliedRemarkDscp The remarked DSCP value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.29 |
| hwAclAppliedScopeIndex When the scope is global, this field is invalid;
When the scope is vlan, this field is vlan ID;
When the scope is interface, this field is interface index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.15.1.3 |
| hwAclAppliedRemarkIpPre The remarked IP precedence value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.30 |
| hwAclAppliedRemarkLocalPre The remarked local precedence value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.31 |
| hwAclAppliedRemarkMacAddr The remarked MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.1.1.15.1.32 |
| hwAclAppliedIsIPv6Acl The object indicates whether is IPv6 ACL. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.15.1.33 |
| hwAclAppliedDirection The direction acl apply on. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.4 |
| hwAclAppliedAclNum The index of ACL group.
Basic ACL in range 2000~2999;
Advance ACL in range 3000~3999;
Link ACL in range 4000~4999; | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.5 |
| hwAclAppliedSubitem The object specifies the number of an ACL rule. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.15.1.6 |
| hwAclAppliedAclNum2 The index of ACL group.
65535 means this field is valid. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.15.1.7 |
| hwAclAppliedSubitem2 The object specifies the number of an ACL rule. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.15.1.8 |
| hwAclAppliedStatMode The object specifies the mode of statistics.
When action is statistic, this field is valid. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.15.1.9 |