hwAclAdvancedTtlExpire
HUAWEI-ACL-MIB ·
.1.3.6.1.4.1.2011.5.1.1.5.1.36
Object
column
r/w
Integer32
The object indicates the begin ttl value. The invalid value is 0.
Context
- MIB
- HUAWEI-ACL-MIB
- OID
.1.3.6.1.4.1.2011.5.1.1.5.1.36- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAclAdvancedRuleEntry
- Table
- hwAclAdvancedRuleTable
- Siblings
- 44
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAclAdvancedAclNum The index of advanced acl table, the index range is (100..199 | 3000..3999 | 42768..76535). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.1.1.5.1.1 |
| hwAclAdvancedDestIp This object indicates the destination IP address.
The value ranges from 0.0.0.0 to 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.10 |
| hwAclAdvancedDestWild This object indicates the mask of the destination IP address.
The value ranges from 0.0.0.0 to 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.11 |
| hwAclAdvancedDestOp The object indicates the destination Port operation symbol of an advanced
acl group. It compares the port operators of destination address.
'lt' means less than,
'eq' means equal … | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.12 |
| hwAclAdvancedDestPort1 This object indicates the end destination port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.13 |
| hwAclAdvancedDestPort2 This object indicates the start destination port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.14 |
| hwAclAdvancedPrecedence The value of this object identifies the precedence sub-field.
It is the higher three bits of the ToS field in an IP header.
The value ranges from 0 to 7. The invalid value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.15 |
| hwAclAdvancedTos The value of this object identifies the ToS sub-field.
This field covers four bits after the higher three bits of the ToS field in an IP header.
The value ranges from 0 to 15. The… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.16 |
| hwAclAdvancedDscp The value of this object identifies the higher six bits of the ToS field in an IP header.
The value ranges from 0 to 63. The invalid value is 255. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.17 |
| hwAclAdvancedEstablish The object indicates whether or not establishing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.18 |
| hwAclAdvancedTimeRangeIndex The object indicates the time range of an advanced acl rule.
When the current time is in the time range, the rule is valid.
Zero value declares that the acl rule has no time rang… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.19 |
| hwAclAdvancedSubitem The object specifies the number of an advanced ACL rule.
If the number specified has been assigned to an ACL rule,
the new rule will overwrite the old one,
which is equal to edi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.1.1.5.1.2 |
| hwAclAdvancedIcmpType The object indicates the type of ICMP packet.
It filters ICMP packets according to the ICMP message type.
The invalid value is 65535. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.20 |
| hwAclAdvancedIcmpCode The object indicates the code of ICMP packet.
It filters ICMP packets according to the message code.
The invalid value is 65535. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.21 |
| hwAclAdvancedFragments The object indicates the type of the packet.
0: fragmentSubseq, indicating that the packet is a subsequent fragment
1: fragment, indicating that the packet is a fragment
2: n… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.22 |
| hwAclAdvancedLog The object indicates whether to log the matched packets. The log
contents include sequence number of ACL rule,
packets passed or discarded, upper layer protocol type over IP,
s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.23 |
| hwAclAdvancedEnable The object indicates whether the rule is valid or invalid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.24 |
| hwAclAdvancedCount The object indicates the statistics of matched packets by the rule. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2011.5.1.1.5.1.25 |
| hwAclAdvancedVrfName The object indicates the VRF name of this rule,
It specifies the VPN-instance to which the packet belongs. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.5.1.26 |
| hwAclAdvancedRowStatus RowStatus, Now support three state: CreateAndGo, Active, Destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.1.1.5.1.27 |
| hwAclAdvancedTcpSyncFlag The object indicates the code of TCP Sync flag(0~63),
The invalid value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.28 |
| hwAclAdvancedDescription The object indicates the description of this advanced rule.
The object describes the usage of an ACL with a word or a sentence. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.5.1.29 |
| hwAclAdvancedAct The object indicates the action of an advanced acl rule.
'deny' means discarding the packets that meet the condition,
'permit' means permitting the packets that meet the condition. | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.3 |
| hwAclAdvancedSrcPoolName The object indicates the source pool name. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.5.1.30 |
| hwAclAdvancedDestPoolName The object indicates the destination pool name. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.5.1.31 |
| hwAclAdvancedProtocolNew The object indicates the protocol type of the rule.
It specifies the protocol type over IP. The number of IP protocol is 65535. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.32 |
| hwAclAdvancedVni The object indicates the ID of VXLAN,
The invalid value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.33 |
| hwAclAdvancedIgmpType The object indicates the type of igmp,
The invalid value is 65535. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.34 |
| hwAclAdvancedTtlOp The object indicates the ttl operation symbol of an advanced acl
rule.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'range' means … | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.35 |
| hwAclAdvancedTtlExpireEnd The object indicates the end ttl value.
The invalid value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.37 |
| hwAclAdvancedPktLenOp The object indicates the packet length operation symbol of an advanced acl
rule.
'lt' means less than,
'eq' means equal to,
'gt' means greater than,
'neq' means not equal to,
'ran… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.38 |
| hwAclAdvancedPktLenBegin The object indicates the begin packet length value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.39 |
| hwAclAdvancedProtocol The value of this object identifies the number of the protocol over IP.
The value ranges from 0 to 255. The value 0 indicates the IP protocol. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.4 |
| hwAclAdvancedPktLenEnd The object indicates the end packet length value. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.40 |
| hwAclAdvancedTcpFlagMask The object indicates the mask of tcp-flag.
The invalid value is 0. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.41 |
| hwAclAdvancedSrcPortPoolName The object indicates the source port pool name. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.5.1.42 |
| hwAclAdvancedDestPortPoolName The object indicates the destination port pool name. | column | OctetString | .1.3.6.1.4.1.2011.5.1.1.5.1.43 |
| hwAclAdvancedIcmpTypeEnd The value of this object identifies the ICMP message type.
The value ranges from 0 to 255. The value 65535 is invalid.
This object is used together with hwAclAdvancedIcmpType to i… | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.44 |
| hwAclAdvancedVrfAny The object indicates whether or not matching any VPN-instance. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.1.1.5.1.45 |
| hwAclAdvancedSrcIp The value of this object identifies the source IP address.
The value ranges from 0.0.0.0 to 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.5 |
| hwAclAdvancedSrcWild The value of this object identifies the wildcard mask of the source IP address.
The value ranges from 0.0.0.0 to 255.255.255.255. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.1.1.5.1.6 |
| hwAclAdvancedSrcOp The object indicates the source Port operation symbol of an advanced acl
rule. It compares the port operators of source address.
'lt' means less than,
'eq' means equal to,
'gt' me… | column | Enumeration | .1.3.6.1.4.1.2011.5.1.1.5.1.7 |
| hwAclAdvancedSrcPort1 This object indicates the end source port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.8 |
| hwAclAdvancedSrcPort2 This object indicates the start source port number. | column | Integer32 | .1.3.6.1.4.1.2011.5.1.1.5.1.9 |