hpnicfRdAccDataFlowUnit

HPN-ICF-RADIUS-MIB · .1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.20
MIB view Table view

Object

column r/w Enumeration 
Specify data flow format that is sent to RADIUS server.  The value
SHOULD be set the same as the value of corresponding server.
1 (byte) -  Specify 'byte' as the unit of data flow.
2 (kiloByte) - Specify 'kilo-byte' as the unit of data flow.
3 (megaByte) - Specify 'mega-byte' as the unit of data flow.
4 (gigaByte) - Specify 'giga-byte' as the unit of data flow.
Default value is 1.

Context

MIB
HPN-ICF-RADIUS-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.20
Type
column
Access
readwrite
Status
current
Parent
hpnicfRdAccInfoEntry
Table
hpnicfRdAccInfoTable
Siblings
30

Syntax

Enumeration

Values & Constraints

Enumerated Values
1byte
2kiloByte
3megaByte
4gigaByte

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfRdAccGroupName
The name of the RADIUS group referred to in this table entry.
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.1
hpnicfRdAccKey
The secret shared between the RADIUS client and RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdAccKey always returns an Octet String of …
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.10
hpnicfRdAccRetry
The number of attempt the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.11
hpnicfRdAccTimeout
The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.12
hpnicfRdAccServerType
Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system.…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.13
hpnicfRdAccQuietTime
The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.14
hpnicfRdAccFailureAction
Defines the action that authentication should take if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore a…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.15
hpnicfRdAccRealTime
Interval of realtime-accounting packets. The unit is minute. When the value is 0, the device doesn't send realtime-accounting packets. Default value is 12.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.16
hpnicfRdAccRealTimeRetry
The number of attempt the client will make when trying to send realtime-accounting packet to accounting server before it will consider the attempt failed. Default value is 5.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.17
hpnicfRdAccSaveStopPktEnable
The control of whether save stop-accounting packet in local buffer and resend later when the accounting server doesn't respond. When SaveStopPktEnable is set to false, the value …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.18
hpnicfRdAccStopRetry
The number of attempt the client will make when trying to send stop-accounting packet to accounting server. Default value is 500.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.19
hpnicfRdPrimAccIpAddrType
The IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.2
hpnicfRdAccPacketUnit
Specify packet format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (onePacket) - Specify 'one-packet' as the unit of p…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.21
hpnicfRdAccRowStatus
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpni…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.22
hpnicfRdAcctOnEnable
The control of Accounting-On function. The Accounting-On function is used by the client to mark the start of accounting (for example, upon booting) by sending Accounting-On packe…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.23
hpnicfRdAcctOnSendTimes
The number of Accounting-On packets the client will send before it considers the accounting server failed. Default value is 50.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.24
hpnicfRdAcctOnSendInterval
Interval of Accounting-On packets. The unit is second. Default value is 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.25
hpnicfRdSecAccKey
The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdSecAccKey always returns an…
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.26
hpnicfRdPrimAccVpnName
The human-readable name of the VPN in which the primary RADIUS accounting server is placed.
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.27
hpnicfRdSecAccVpnName
The human-readable name of the VPN in which the secondary RADIUS accounting server is placed.
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.28
hpnicfRdAccNasIpAddrType
The type (IPv4 or IPv6) of the source IP used to communicate with RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.29
hpnicfRdPrimAccIpAddr
The IP address of primary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.3
hpnicfRdAccNasIpAddr
The source IPv4 address used to communicate with the RADIUS accounting server.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.30
hpnicfRdAccNasIpv6Addr
The source IPv6 address used to communicate with the RADIUS accounting server.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.31
hpnicfRdPrimAccUdpPort
The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.4
hpnicfRdPrimAccState
The state of the primary RADIUS accounting server. 1 (active) The primary accounting server is in active state. 2 (block) The primary accounting server is in block state.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.5
hpnicfRdSecAccIpAddrType
The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.6
hpnicfRdSecAccIpAddr
The IP address of secondary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.7
hpnicfRdSecAccUdpPort
The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.8
hpnicfRdSecAccState
The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.9