hpnicfPoskeepaliveTimeout
HPN-ICF-PPP-OVER-SONET-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.13
Object
column
r/w
Integer32
The keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.
Context
- MIB
- HPN-ICF-PPP-OVER-SONET-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfPosParamTableEntry
- Table
- hpnicfPosParamTable
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfPosCRC The length of CRC | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.1 |
| hpnicfPosFrameType The frame type that encapsulates the packet. Default frame type is
sdh(Synchronous Digital Hierarchy) It also can be configured using
sonet type(Synchronous Optical Network). | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.10 |
| hpnicfPosBindVlanId The vlan that this pos port binds. The vlan can not include any other
port, otherwise error will be returned. If the vlan has a virtual
interface, the status of virtual interface … | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.11 |
| hpnicfPosEncapsulation The type of encapsulation | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.12 |
| hpnicfPosBERthresholdSF The bit-error rate threshold for Signal Fault. SF threshold should
be greater than SD threshold. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.14 |
| hpnicfPosBERthresholdSD The bit-error rate threshold for Signal Degrade. SD threshold should
be less than SF threshold. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.15 |
| hpnicfPosB1Error Counter for SBIPE(Section Bit Interleave Parity Error) | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.16 |
| hpnicfPosB2Error Counter for LBIPE(Line Bit Interleave Parity Error) | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.17 |
| hpnicfPosB3Error Counter for PBIPE(Path Bit Interleave Parity Error) | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.18 |
| hpnicfPosM1Error How many times does LREI(Line Remote Error Indication) occur | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.19 |
| hpnicfPosMTU Maximum Transfer Unit (MTU) of POS interface | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.2 |
| hpnicfPosG1Error How many times does PREI(Path Remote Error Indication) occur | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.20 |
| hpnicfPosFlagJ0Type The frame type that encapsulates the flag J0. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.21 |
| hpnicfPosFlagJ1Type The frame type that encapsulates the flag J1. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using
sonet(Synchronous Optical Network) type. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.22 |
| hpnicfPosB1TCAThreshold Threshold for B1 TCA. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.23 |
| hpnicfPosB2TCAThreshold Threshold for B2 TCA. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.24 |
| hpnicfPosB3TCAThreshold Threshold for B3 TCA. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.25 |
| hpnicfPosB1TCAEnable Enable traps of B1 TCA. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.26 |
| hpnicfPosB2TCAEnable Enable traps of B2 TCA. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.27 |
| hpnicfPosB3TCAEnable Enable traps of B3 TCA. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.28 |
| hpnicfPosScramble Scrambling is used to avoid continuous 0 or 1 in signals. This
object is to decide whether to scramble or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.3 |
| hpnicfPosClockSource The value indicates the source of clock signal. System indicates
that clock signals are from device itself and line for clock signals
from remote | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.4 |
| hpnicfPosSdhFlagJ0 The section trace byte. This node is used when the frame type is sdh. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.5 |
| hpnicfPosSdhFlagJ1 The path trace byte. This node is used when the frame type is sdh. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.6 |
| hpnicfPosSonetFlagJ0 The section trace byte. This node is used when the frame type is sonet. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.7 |
| hpnicfPosSonetFlagJ1 The path trace byte. This node is used when the frame type is sonet. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.8 |
| hpnicfPosFlagC2 The parameter for the channel signal value of C2 byte | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.9 |