hpnicfNTPSysRefid
HPN-ICF-NTP-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.6
Object
scalar
OctetString
Reference Clock Identifier : This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string. Stratum, Code, Meaning 0, DCN, DCN routing protocol 0, TSP, TSP time protocol 1, ATOM, Atomic clock (calibrated) 1, WWVB, WWVB LF (band 5) radio 1, GOES, GOES UHF (band 9) satellite 1, WWV, WWV HF (band 7) radio
Context
- MIB
- HPN-ICF-NTP-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.6- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hpnicfNTPSystemMIBObjects
- Siblings
- 19
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfNTPSysLeap Leap Indicator (LI): This is a two-bit code warning of an impending
leap second to be inserted/deleted in the last minute of the current
day, with bit 0 and bit 1, respectively, c… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.1 |
| hpnicfNTPSysState This is a integer indicating the state of local clock. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.10 |
| hpnicfNTPSysOffset The offset of two clocks is the time difference between them, in milliseconds. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.11 |
| hpnicfNTPSysDrift Real clocks exhibit some variation in skew (second derivative of
offset with time), which is called drift. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.12 |
| hpnicfNTPSysCompliance This is a string indicating the system error. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.13 |
| hpnicfNTPSysClock This is the current local time, in timestamp
format. Local time is derived from the hardware clock of the particular
machine and increments at intervals depending on the design u… | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.14 |
| hpnicfNTPSysStabil This is a indicating that stability of a clock is how well
it can maintain a constant frequency. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.15 |
| hpnicfNTPSysAuthenticate This is a integer indicating that system support authentication. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.16 |
| hpnicfNTPSysPollSec PollSec Interval : This is a integer indicating the minimum
interval between transmitted messages. For instance, a value of
six indicates a minimum interval of 6 seconds. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.17 |
| hpnicfNTPSysClockSec This is the current local time, in integer format.
Local time is derived from the hardware clock of the particular
machine and increments at intervals depending on the design used. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.18 |
| hpnicfNTPServerIP The NTP server ip address. It must be a unicast address,
rather than a broadcast address, a multicast address or
the IP address of the local clock. To delete a configured
NTP se… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.19 |
| hpnicfNTPSysStratum This is an eight-bit integer indicating the stratum level
of the local clock, with values defined as follows:
0, unspecified
1, primary reference (e.g.,, radio clock)
2-255, secon… | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.2 |
| hpnicfNTPSysSrcPeer This is a selector identifying the current synchronization
source. Usually this will be a unsigned integer containing
the peer variables. The special value 0 indicates
There is … | scalar | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.20 |
| hpnicfNTPSysPrecision Precision : This is a signed integer indicating the
precision of the various clocks, in seconds to the nearest
power of two. The value must be rounded to the next larger
power of… | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.3 |
| hpnicfNTPSysRootdelay Root Delay : This is a signed fixed-point number indicating
the total roundtrip delay to the primary reference source
at the root of the synchronization subnet, in milliseconds. … | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.4 |
| hpnicfNTPSysRootdispersion Root Dispersion : This is a signed fixed-point number
indicating the maximum error relative to the primary
reference source at the root of the synchronization
subnet, in milliseco… | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.5 |
| hpnicfNTPSysReftime Reference Timestamp : This is the local time, in
timestamp format, when the local clock was last
updated. If the local clock has never been synchronized,
the value is zero. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.7 |
| hpnicfNTPSysPoll Poll Interval : This is a signed integer indicating
the minimum interval between transmitted messages,
in seconds as a power of two. For instance, a value
of six indicates a mini… | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.8 |
| hpnicfNTPSysPeer obsolete This is a selector identifying the current synchronization
source. Usually this will be a pointer to a structure
containing the peer variables. The special value NULL indicates
… | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.9 |