hpnicfNTPPeerFiltError
HPN-ICF-NTP-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.31
Object
column
OctetString
The maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are possible.
Context
- MIB
- HPN-ICF-NTP-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.31- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpnicfNTPPeerEntry
- Table
- hpnicfNTPPeerTable
- Siblings
- 35
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfNTPPeerConfig This is a bit indicating that the association was created
from configuration information and should not be demobilized
if the peer becomes unreachable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.1 |
| hpnicfNTPPeerStratum This is a integer indicating the stratum level
of the peer clock, with values defined as follows:
0, unspecified
1, primary reference (e.g.,, radio clock)
2-255, secondary referen… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.10 |
| hpnicfNTPPeerPPoll The interval at which the peer polls the local host. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.11 |
| hpnicfNTPPeerHPoll The interval at which the local host polls the peer. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.12 |
| hpnicfNTPPeerPrecision This is a signed integer indicating the precision of
the peer clock, in seconds to the nearest power of two.
The value must be rounded to the next larger power of
two; for instanc… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.13 |
| hpnicfNTPPeerRootDelay This is a signed fixed-point number indicating
the total roundtrip delay to the primary reference source
at the root of the synchronization subnet, in milliseconds.
Note that this… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.14 |
| hpnicfNTPPeerRootDispersion This is a signed fixed-point number indicating
the maximum error of the peer clock relative to
the primary reference source at the root of the
synchronization subnet, in milliseco… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.15 |
| hpnicfNTPPeerRefId The reference identifier of the peer.
This is a 32-bit code identifying the particular reference clock.
In the case of stratum 0 (unspecified) or stratum 1 (primary
reference sour… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.16 |
| hpnicfNTPPeerRefTime This is the local time at the peer, in timestamp format,
when the local clock was last updated. If the local clock has
never been synchronized, the value is zero. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.17 |
| hpnicfNTPPeerOrg This is the local time, in timestamp format,
at the peer when it's latest NTP message was sent.
If the peer becomes unreachable the value is set to zero | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.18 |
| hpnicfNTPPeerRec This is the local time, in timestamp format,
when the latest NTP message from the peer arrived.
If the peer becomes unreachable the value is set to zero. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.19 |
| hpnicfNTPPeerAuthenable This is a bit indicating that system support authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.2 |
| hpnicfNTPPeerXmt This is the local time, in timestamp format,
at which the NTP message departed the sender. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.20 |
| hpnicfNTPPeerReach This is a shift register of NTP.WINDOW bits used to
determine the reach ability status of the peer,
with bits entering from the least significant (rightmost) end.
A peer is consid… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.21 |
| hpnicfNTPPeerValid This is an integer counter indicating the valid samples
remaining in the filter register. It is used to
determine the reach ability state and when the
poll interval should be inc… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.22 |
| hpnicfNTPPeerTimer This is an integer counter used to control the
interval of transmitted NTP messages from the local host to the peer. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.23 |
| hpnicfNTPPeerDelay This is a signed fixed-point number indicating
the roundtrip delay of the peer clock relative to
the local clock over the network path between them,
in milliseconds. Note that th… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.24 |
| hpnicfNTPPeerOffset This is a signed, fixed-point number indicating the offset
of the peer clock relative to the local clock, in milliseconds. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.25 |
| hpnicfNTPPeerJitter This is an indicating that peer of sample Variance | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.26 |
| hpnicfNTPPeerDispersion This is a signed fixed-point number indicating the
maximum error of the peer clock relative to the local
clock over the network path between them, in milliseconds.
Only positive v… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.27 |
| hpnicfNTPPeerKeyId This is an unsigned integer identifying the cryptographic
key used to generate the message-authentication code. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.28 |
| hpnicfNTPPeerFiltDelay Round-trip delay of the peer clock relative to the
local clock over the network path between them, in
milliseconds. This variable can take on both positive
and negative values, d… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.29 |
| hpnicfNTPPeerAuthentic This is a bit indicating that massage pass authentication which is authentic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.3 |
| hpnicfNTPPeerFiltOffset The offset of the peer clock relative to the local clock in milliseconds. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.30 |
| hpnicfNTPPeerPMode This is an integer indicating the association mode,
with values coded as follows,
0, unspecified
1, symmetric active - A host operating in this mode
sends periodic message… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.32 |
| hpnicfNTPPeerReceived The number of received massages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.33 |
| hpnicfNTPPeerSent The number of send massages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.34 |
| hpnicfNTPPeerFlash The information about the massage. | column | Bits | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.35 |
| hpnicfNTPPeerRowStatus The status object for this row. When a management
station is creating a new row, it should set the
value for cntpPeersPeerAddress at least, before the
row can be made 'active'. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.36 |
| hpnicfNTPPeerRemAdr The IP address of the peer. When creating a new
association, a value for this object should be set
before the row is made active. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.4 |
| hpnicfNTPPeerRemPort The UDP port number on which the peer receives NTP messages. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.5 |
| hpnicfNTPPeerLocAdr The IP address of the local host. Multi-homing can
be supported using this object. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.6 |
| hpnicfNTPPeerLocPort The UDP port number on which the local host receives NTP messages. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.7 |
| hpnicfNTPPeerLeap This is a two-bit code warning of an impending leap
second to be inserted in the NTP timescale. The bits
are set before 23:59 on the day of insertion and reset
after 00:00 on the… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.8 |
| hpnicfNTPPeerHMode This is an integer indicating the association mode,
with values coded as follows,
0, unspecified
1, symmetric active - A host operating in this mode
sends periodic message… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.9 |