hpnicfNqaResultsRttBusies
HPN-ICF-NQA-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3
Object
column
SNMPv2-SMIUnsigned32
The number of times that a NQA probe failed because all
NQA tasks have been running.
If a new probe fails to start, the value of this object
is incremented. The next test will not start until the
next Frequency.
Context
- MIB
- HPN-ICF-NQA-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpnicfNqaResultsEntry
- Table
- hpnicfNqaResultsTable
- Siblings
- 19
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfNqaResultsRttNumDisconnects The number of times that a NQA probe failed because
the destination became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.1 |
| hpnicfNqaResultsLostPacketRatio The value of this object reflects the drop rate of NQA test.
For example, this value is 30 that means source device only
had received 70% packets of total sent packets. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.10 |
| hpnicfNqaResultsPacketLateArrival The value of this object indicates the number of the packets that
arrived after the timeout. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.11 |
| hpnicfNqaResultsRttSum The sum of round trip time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.12 |
| hpnicfNqaResultsNumOfDelaySD The number of delay from source to destination that are
successfully measured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.13 |
| hpnicfNqaResultsMinDelaySD The minimum of all one way times from source to destination. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.14 |
| hpnicfNqaResultsSumDelaySD The sum of one way times from source to destination. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.15 |
| hpnicfNqaResultsSum2DelaySD The sum of squares of one way times from source to destination. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.16 |
| hpnicfNqaResultsNumOfDelayDS The number of delay from destination to source that are
successfully measured. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.17 |
| hpnicfNqaResultsMinDelayDS The minimum of all one way times from destination to source. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.18 |
| hpnicfNqaResultsSumDelayDS The sum of one way times from destination to source. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.19 |
| hpnicfNqaResultsRttTimeouts The number of times that a NQA probe failed because the
probe timed out. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.2 |
| hpnicfNqaResultsSum2DelayDS The sum of squares of one way times from destination to source. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.20 |
| hpnicfNqaResultsRttNoConnections The number of times that a NQA probe failed because the probe
destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.4 |
| hpnicfNqaResultsRttDrops The number of times that a NQA operation failed to initiated
for unavailibility of necessary internal resources. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.5 |
| hpnicfNqaResultsRttSequenceErrors The number of packets arrived out of sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.6 |
| hpnicfNqaResultsRttStatsErrors The number of some other errors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.7 |
| hpnicfNqaResultsMaxDelaySD The maximal delay from source device to destination device.
Currently this value is only used for jitter test, and this
value must be 0 in other type test. In jitter test, if
dest… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.8 |
| hpnicfNqaResultsMaxDelayDS The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destinati… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.9 |