hpnicfMplsLdpLsrID
HPN-ICF-MPLS-LDP-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.1
Object
column
r/w
MplsLsrIdentifier
The LSR's Identifier.
Context
- MIB
- HPN-ICF-MPLS-LDP-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfMplsLdpLsrIncarnEntry
- Table
- hpnicfMplsLdpLsrIncarnTable
- Siblings
- 20
Syntax
MplsLsrIdentifier
- Source
- MplsLsrIdentifier
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfMplsLdpLsrMaxLdpEntities The maximum number of LDP entities that can be supported by this
Incarnation. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.10 |
| hpnicfMplsLdpLsrMaxLocalPeers The maximum number of Local LDP peers that can be supported by
this Incarnation. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.11 |
| hpnicfMplsLdpLsrMaxRemotePeers The maximum number of Remote LDP peers that can be supported by
this Incarnation. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.12 |
| hpnicfMplsLdpLsrMaxIfaces The maximum number of Label enabled Interfaces that can be
supported by this Incarnation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.13 |
| hpnicfMplsLdpLsrMaxLsps The maximum number of Label Switched Paths that can be
supported by this Incarnation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.14 |
| hpnicfMplsLdpLsrMaxCrlspTnls The maximum number of CRLSPs that can be supported by this
Incarnation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.15 |
| hpnicfMplsLdpLsrMaxErhopPerCrlspTnl The maximum number of ER-Hops that can be supported in a
CRLSP tunnel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.16 |
| hpnicfMplsLdpLsrRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.17 |
| hpnicfMplsLdpLsrMaxVcmCapability | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.18 |
| hpnicfMplsLdpLsrVcmPathVecInAllLblMapPresent | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.19 |
| hpnicfMplsLdpLsrLoopDetectionPresent A indication of whether this LSR supports loop detection. A
value of 'true' indicates this LSR does support loop detection.
A value of 'false' indicates this LSR does not supp… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.2 |
| hpnicfMplsLdpLsrRequestRetrytimerValue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.20 |
| hpnicfMplsLdpLsrNumOfRequestRetryAttempts | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.21 |
| hpnicfMplsLdpLsrLoopDetectionAdminStatus To enable loop detection the value of this object should be
'enabled(1)'. Otherwise, to turn off loop detection, set this
value to 'disabled(2)'. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3 |
| hpnicfMplsLdpLsrPathVectorLimit This object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent
has the value of 'true'.
The value of this object represents the limit of path vectors which
t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.4 |
| hpnicfMplsLdpLsrHopCountLimit This object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent
has the value of 'true'.
The value of this object represents the limit on the Hop Count
which… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.5 |
| hpnicfMplsLdpLsrLoopPreventionPresent A indication of whether this LSR supports loop prevention. A
value of 'true' indicates this LSR does support loop prevention.
A value of 'false' indicates this LSR does not su… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.6 |
| hpnicfMplsLdpLsrLoopPreventionAdminStatus To enable loop prevention the value of this object should be
'enabled(1)'. Otherwise, to turn off loop prevention, set this
value to 'disabled(2)'.
Current relea… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.7 |
| hpnicfMplsLdpLsrLabelRetentionMode The LSR can be configured to use either conservative or liberal
label retention mode.
If the value of this object is conservative(1) then advertized
label mapping… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.8 |
| hpnicfMplsLdpLsrIncarnID The incarnation acts as index to all the elements in this
table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.9 |