hpnicfifInErrorPktsRate

HPN-ICF-LswINF-MIB · .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.37
MIB view Table view

Object

column SNMPv2-SMIInteger32 
The rate of inbound error packets on the interface.

Context

MIB
HPN-ICF-LswINF-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.37
Type
column
Access
readonly
Status
current
Parent
hpnicfifXXEntry
Table
hpnicfifXXTable
Siblings
39

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfifUnBoundPort
Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.1
hpnicfifXXBasePortIndex
Index number of the port and the first port index of the device is 1.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.10
hpnicfifXXDevPortIndex
Device index of the port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.11
hpnicfifPpsMcastControl
The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.12
hpnicfifPpsBcastDisValControl
Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it …
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.13
hpnicfifUniSuppressionStep
The step of unicast suppression in ratio mode.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.14
hpnicfifPpsUniSuppressionMax
The max pps(packet per second) value of unicast suppression in pps mode.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.15
hpnicfifMulSuppressionStep
The step of multicast suppression in ratio mode.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.16
hpnicfifPpsMulSuppressionMax
The max pps(packet per second) value of multicast suppression in pps mode.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.17
hpnicfifUniSuppression
The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifUniSuppressionStep.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.18
hpnicfifPpsUniSuppression
The unicast suppression in pps(packet per second) mode. The max value is determined by hpnicfifPpsUniSuppressionMax.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.19
hpnicfifISPhyPort
Whether it is a physical interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.2
hpnicfifMulSuppression
The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifMulSuppressionStep.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.20
hpnicfifPpsMulSuppression
The multicast suppression in pps(packet per second) mode. The max pps value is determined by hpnicfifPpsMulSuppressionMax.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.21
hpnicfifComboActivePort obsolete
Active port on combo interface.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.22
hpnicfifBMbpsMulSuppressionMax
The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.23
hpnicfifBMbpsMulSuppression
With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbps…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.24
hpnicfifBKbpsMulSuppressionMax
The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.25
hpnicfifBKbpsMulSuppressionStep
The step of multicast suppression with bandwidth-based(Kbps).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.26
hpnicfifBKbpsMulSuppression
With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbps…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.27
hpnicfifUnknownPacketDropMul
Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound…
columnDropDirection.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.28
hpnicfifUnknownPacketDropUni
Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound dir…
columnDropDirection.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.29
hpnicfifAggregatePort
Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.3
hpnicfifBMbpsUniSuppressionMax
The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.30
hpnicfifBMbpsUniSuppression
With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsUniS…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.31
hpnicfifBKbpsUniSuppressionMax
The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.32
hpnicfifBKbpsUniSuppressionStep
The step of unicast suppression with bandwidth-based(Kbps).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.33
hpnicfifBKbpsUniSuppression
With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsUniS…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.34
hpnicfifOutPayloadOctets
The actual output octets of the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.35
hpnicfifInPayloadOctets
The actual input octets of the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.36
hpnicfifInPkts
The number of packets received on the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.38
hpnicfifInNormalPkts
The number of normal packets received on the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.39
hpnicfifMirrorPort
Whether it is a mirror port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.4
hpnicfifOutPkts
The number of packets sent on the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.40
hpnicfifVLANType
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.5
hpnicfifMcastControl
Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.6
hpnicfifFlowControl
Flow control status.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.7
hpnicfifSrcMacControl
Whether to filter by source MAC address.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.8
hpnicfifClearStat
Clear specify port statistics. Operation read is not supported.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.9