hpnicfVlanVPNTPIDMode
HPN-ICF-LswINF-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.9
Object
scalar
Enumeration
Vlan VPN TPID mode.
The value 'port-based' means VLAN VPN TPID value would be set based
on port via hpnicfifVlanVPNTPID. In this situation, hpnicfVlanVPNTPID is
meaningless and always return 0x8100.
The value 'global' means VLAN VPN TPID value should be set globally
via hpnicfVlanVPNTPID. In this situation, hpnicfifVlanVPNTPID in hpnicfethernetTable
has the same value with hpnicfVlanVPNTPID.
Context
- MIB
- HPN-ICF-LswINF-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.9- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hpnicfLswL2InfMibObject
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | port-based |
2 | global |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfSlotPortMax Max ports of the slots. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.1 |
| hpnicfVlanVPNTPID Global Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.10 |
| hpnicfPortIsolateGroupTable Isolate Group attribute table. | table | - | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11 |
| hpnicfMaxMacLearnRange The maximum number of MAC address that the port supports. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.12 |
| hpnicfifPortProtocolStatTable This table contains objects of port statistics information based on
IPv4 and IPv6 protocols. | table | - | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13 |
| hpnicfSwitchPortMax Max ports that this switch includes. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.2 |
| hpnicfifVLANTrunkStatusTable Gvrp attributes on the VlanTrunk port. | table | - | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3 |
| hpnicfethernetTable Ethernet port attribute table. | table | - | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4 |
| hpnicfIsolateGroupMax Max isolate group that this device support, the value is zero
means that the device does not support isolate group. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.5 |
| hpnicfGlobalBroadcastMaxPps The global max packets per second. When it is set, the value of
BroadcastMaxPps in all ports will be changed to that setting. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.6 |
| hpnicfGlobalBroadcastMaxRatio The global max-ratio of broadcast from 0 to 100 percent.
When it is set, the value of BroadcastMaxRatio in all ports
will be changed to that setting. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.7 |
| hpnicfBpduTunnelStatus Bpdu tunnel enable status. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.8 |