hpnicfDot11StationSecIEStatusCM
HPN-ICF-DOT11-STATION-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.38
Object
column
Enumeration
Represents the security Information element for this station. The following values are supported: none - both wpa and wpa2 are disabled, wpa - only enable wpa, wpa2 - only enable wpa2, wlanex - only enable wlanex.
Context
- MIB
- HPN-ICF-DOT11-STATION-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.38- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpnicfDot11StationAssociateEntry
- Table
- hpnicfDot11StationAssociateTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | wpa |
2 | wpa2 |
3 | wlanex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11StationMAC Represents the unique MAC Address of station. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.1 |
| hpnicfDot11StationAid Represents the association identification number of station. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.10 |
| hpnicfDot11StationVlanId Represents Vlan ID to which the station is associated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.11 |
| hpnicfDot11StationSSIDName Represents the ESS name. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDStringType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.12 |
| hpnicfDot11StationAuthenMode Represents the Authentication mode defined by 802.11. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11AuthenType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.13 |
| hpnicfDot11StationAKMMode Represents the key management mode defined by 802.11i. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11AKMType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.14 |
| hpnicfDot11StationSecurityCiphers Represents the frame encryption cipher type used by
station. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11CipherType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.15 |
| hpnicfDot11StationSSIDEncryptMode Represents the encryption mode for this ESS. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDEncryptModeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.16 |
| hpnicfDot11StationRxSNR Represents the signal and noise strength ratio of frame reception. | column | One Percent SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.17 |
| hpnicfDot11StationTxRate Represents the transmission rate of frame. | column | Mbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.18 |
| hpnicfDot11StationRxRate Represents the reception rate of frame. | column | Mbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.19 |
| hpnicfDot11StationIPAddress Represents the IP address of the station. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.2 |
| hpnicfDot11StationVendorName Represents the vendor name of the station. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.20 |
| hpnicfDot11StationRadioMode Represents which radio type supported by the station.
The WLAN system support the following possible radio types.
dot11a(1),
dot11b(2),
dot11g(4),
dot11n(8)
For a station,it could… | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.21 |
| hpnicfDot11StationRxNoise Represents the received noise of the station. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.22 |
| hpnicfDot11StationMACAddress Represents MAC Address of station. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.23 |
| hpnicfDot11StationTxSpeed Represents the bytes of transmitted data frames to the
station per second in sample interval. | column | byte/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.24 |
| hpnicfDot11StationRxSpeed Represents the bytes of received data frames from the
station per second in sample interval. | column | byte/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.25 |
| hpnicfDot11StationWmmMode Represents the QoS mode of station.
The following values are supported:
wmm - This QoS function is supported by this station.
nonwmm - This QoS function is not supported by thi… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.26 |
| hpnicfDot11StationSecIEStatus Represents the security Information element for this station. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11SecIEStatusType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.27 |
| hpnicfDot11StationUpTimeTicks Represents how long this station has been associated
with this device. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.28 |
| hpnicfDot11StationRadioMode2 Represents which radio type supported by the station.
The WLAN system support the following possible radio types.
dot11a(1),
dot11b(2),
dot11g(4),
dot11an(8),
dot11gn(16)
For a st… | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType2 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.29 |
| hpnicfDot11StationUserName Represents the user name of the station. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.3 |
| hpnicfDot11StationAssTime Represents the time at which the station connected. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.30 |
| hpnicfDot11StationUserAuthType Represents the type of user authentication with this station.
portalAuth - The authentication lunched by portal pop-up program
which is need input username and passward,exclude… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.31 |
| hpnicfDot11StationRfPingTest This object is used to start rfping test of the station.
It will return false for get operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.32 |
| hpnicfDot11StationMaxRate Represents the max negotiation rate of the station. | column | Mbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.33 |
| hpnicfDot11StationPowerSaveModeCM Represents the power management mode of the client.
The following values are supported:
active - This client is not in power-save
mode and it is actively sending or receiving d… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.34 |
| hpnicfDot11StationAuthenModeCM Represents the authentication mode defined by 802.11.
The following values are supported:
opensystem - Do not authenticate.
sharedkey - System will use challenge message to
a… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.35 |
| hpnicfDot11StationAKMModeCM Represents the key management mode defined by 802.11i.
The following values are supported:
none - no key management mode configured,
psk - pre-shared key authenti… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.36 |
| hpnicfDot11StationSecurityCiphersCM Represents the frame encryption cipher type used by
station.
The following values are supported:
none - clear text or no cipher method is configure,
wep40 - 40-bit WEP key,… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.37 |
| hpnicfDot11StationTxRateSet Represents the current transmit data rates for this station.
Each byte will represent one rate. If the MSB(Most significant bit)
is set, then this rate is a mandantory rate. Oth… | column | Mbps OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.4 |
| hpnicfDot11StationUpTime The time in seconds, how long this station has been associated
with this device. | column | second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.5 |
| hpnicfDot11StationSignalStrength Represents a device-dependent measure of the signal strength
of latest packet received from this station. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.6 |
| hpnicfDot11StationRSSI Represents a device-dependent measure of the RSSI.
It is the received signal strength indication.
The maximum value is defined by chip set vendors | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.7 |
| hpnicfDot11StationChannel Represents current radio channel used by station. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.8 |
| hpnicfDot11StationPowerSaveMode Represents the power management mode of this station.
The following values are supported:
active - This station is not in power-save
mode and it is actively sending or
receivin… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.9 |