hpnicfDot11SaTrapIntfDevType
HPN-ICF-DOT11-SA-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.4
Object
scalar
HPN-ICF-DOT11-REF-MIBHpnicfDot11SaIntfDevType
Represents type of the interferer.
Context
- MIB
- HPN-ICF-DOT11-SA-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.4- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hpnicfDot11SaTrapVars
- Siblings
- 11
Syntax
HPN-ICF-DOT11-REF-MIBHpnicfDot11SaIntfDevType
- Source
- HPN-ICF-DOT11-REF-MIBHpnicfDot11SaIntfDevType
- Base type
Enumeration
Values & Constraints
Type Values
1 | microwave |
2 | microwaveInverter |
3 | bluetooth |
4 | fixedFreqOthers |
5 | fixedFreqCordlessPhone |
6 | fixedFreqVideo |
7 | fixedFreqAudio |
8 | freqHopperOthers |
9 | freqHopperCordlessBase |
10 | freqHopperCordlessNetwork |
11 | freqHopperXbox |
12 | genericInterferer |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11SaTrapAPID Represents the identifier of the AP. | scalar | HPN-ICF-DOT11-REF-MIBHpnicfDot11ObjectIDType | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.1 |
| hpnicfDot11SaTrapChlNum Represents the radio channel where the air quality is monitored. | scalar | HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.10 |
| hpnicfDot11SaTrapChlQlt Represents the quality for this radio channel. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.11 |
| hpnicfDot11SaTrapChlIntfNum Represents the number of interferers detected by the radios
on the 802.11a/n or 802.11b/g/n radio band. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.12 |
| hpnicfDot11SaTrapRadioID Represents the identifier of the radio. | scalar | HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.2 |
| hpnicfDot11SaTrapDevID Represents the device identification number that uniquely
identified the interfering device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.3 |
| hpnicfDot11APTrapDevSI Represents severity index of the interfering device. Severity index
is calculated, a positive integer between 0 and 100(with 100 being the
most severe). | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.5 |
| hpnicfDot11SaTrapDevRSSI Represents receive signal strength indicator (RSSI) of interfering
device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.6 |
| hpnicfDot11APTrapDevDC Represents proportion of time in percentage during which the
interfering device was active. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.7 |
| hpnicfDot11APTrapDevChls Represents channels that the interfering device affects. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.8 |
| hpnicfDot11APTrapDevDctTime Represents time at which the interference was detected. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.9 |