hpnicfDot11SaTrapDevType
HPN-ICF-DOT11-SA-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.5
Object
column
r/w
Bits
Represents which types of interference device will send traps when the interference device trap is enabled.
Context
- MIB
- HPN-ICF-DOT11-SA-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfDot11SaCfgEntry
- Table
- hpnicfDot11SaCfgTable
- Siblings
- 8
Syntax
Bits
Values & Constraints
Enumerated Values
0 | microwave |
1 | microwaveInverter |
2 | bluetooth |
3 | fixedFreqOthers |
4 | fixedFreqCordlessPhone |
5 | fixedFreqVideo |
6 | fixedFreqAudio |
7 | freqHopperOthers |
8 | freqHopperCordlessBase |
9 | freqHopperCordlessNetwork |
10 | freqHopperXbox |
11 | genericInterferer |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11SaCfgRadioType Represents the radio type of the configuration. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.1 |
| hpnicfDot11SaEnable Represents whether spectrum analysis is enabled globally. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.2 |
| hpnicfDot11SaRptDevType Represents which types of interference devices should be reported. | column | Bits | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.3 |
| hpnicfDot11SaTrapDevEnable Represents whether the interference device trap is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.4 |
| hpnicfDot11SaTrapAQEnable Represents whether the air quality trap is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.6 |
| hpnicfDot11SaTrapAQThreshold Represents the air quality trap threshold. When the air quality
is below this value, the air quality trap will be sent. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.7 |
| hpnicfDot11SaDrivenRRMEnable Configure whether to trigger RRM to run when an access point detects
a certain level of interference. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.8 |
| hpnicfDot11SaDrivenRRMSnt Configure the threshold at which RRM will be triggered. When the
interference level for the access point rises above the threshold
level, RRM initiates a local dynamic channel as… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9 |