hpnicfDot11ACMtTunnelSetupTrap
HPN-ICF-DOT11-ACMT-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1
Object
notification
This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel.
Context
- MIB
- HPN-ICF-DOT11-ACMT-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1- Type
- notification
- Status
- current
- Parent
- hpnicfDot11ACMtTraps
- Siblings
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11ACMtTunnelDownTrap This notification is sent by AC when CAPWAP tunnel becomes down.
By this way, NMS will immediately know tunnel down event.
It is unnecessary to identify whether it is control or d… | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.2 |
| hpnicfDot11ACMtBackupSwtTrap This trap is sent by AC when AC switches from master to slave
or from slave to master. | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.3 |
| hpnicfDot11ACLoadBalanceTrap This trap is sent by AC when load-balance is enabled on AC. | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.4 |
| hpnicfDot11ACStaFullTrap This notification will be sent when STA is full on AC. | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.5 |
| hpnicfDot11ACStatusSwitchTrap This notification will be sent when AC switches from standby to active
or from standby to active. | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.6 |
| hpnicfDot11RunAPNumOverload The notification will be sent by AC when run AP number exceeds the threshold. | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.7 |
| hpnicfDot11RunAPNumOverloadRecover The notification will be sent by AC when run AP number
recover normal from overload state. | notification | - | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.8 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11CurrTunnelAPID To uniquely identify the CAPWAP tunnel set up between the AP
identified by APID and a specific AC. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11ObjectIDType | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.1 |
| hpnicfDot11ACMtTrapTunlUpInfo Represents the reason for tunnel up.
The following values are supported:
up(1) - The AP joined AC. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.2 |
| hpnicfDot11ACMtTrapTnlAPName Represents name of the AP which sets up the tunnel with the AC. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.4 |
| hpnicfDot11ACMtTrapTnlAPIPAddr Represents IP address of the AP which sets up the tunnel with the AC. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.5 |
| hpnicfDot11ACMtTrapAPIPv6Addr Represents IPv6 address of the AP which sets up the tunnel with
the AC. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.8 |
| hpnicfDot11ACMtFirstTrapTime Represents the first trap time. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.12 |
| hpnicfDot11ACMtTrapAPMacAddress Represents the MAC address of an AP. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.15 |