hpnicfBfdSessLocalAddr

HPN-ICF-BFD-STD-MIB · .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.9

MIB view Table view

Object

column INET-ADDRESS-MIBInetAddress

This variable defines IP address of the local interface
from which the BFD packets is transmitted.
It can also be used to enabled BFD on a specific
interface. The value is set to zero when BFD session is not
associated with a specific interface.

Context

MIB: HPN-ICF-BFD-STD-MIB
OID: .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.9
Type: column
Access: readonly
Status: current
Parent: hpnicfBfdSessEntry
Table: hpnicfBfdSessTable
Siblings: 14

Syntax

INET-ADDRESS-MIBInetAddress

Source: INET-ADDRESS-MIBInetAddress
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hpnicfBfdSessIfIndex This variable contains an interface's index under which the BFD session runs.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.1`
hpnicfBfdSessRemoteAddr This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10`
hpnicfBfdSessLocalDiag The BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value.	column	BfdDiag	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.11`
hpnicfBfdSessState The state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one for tea…	column	Enumeration	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.12`
hpnicfBfdSessControlPlanIndepFlag This variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local system is independent…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.13`
hpnicfBfdSessAuthFlag This variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.14`
hpnicfBfdSessDemandModeFlag This variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.15`
hpnicfBfdSessIndex This variable contains an index which represents a unique BFD session on this device.	column	BfdSessIndexTC	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.2`
hpnicfBfdSessAppSupportId This variable contains an ID used to indicate a local application which owns or maintains this BFD session. Note, a BFD session can support several route protocols. This is a bit-…	column	Bits	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.3`
hpnicfBfdSessLocalDiscr This variable defines the local discriminator for this BFD session, used to uniquely identify it.	column	Unsigned32	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.4`
hpnicfBfdSessRemoteDiscr This variable defines the session discriminator chosen by the remote system for this BFD session.	column	Unsigned32	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.5`
hpnicfBfdSessDstPort The UDP Port for BFD. The default value is the well-known value for this port.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.6`
hpnicfBfdSessOperMode This variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In this …	column	Enumeration	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.7`
hpnicfBfdSessAddrType This object defines IP address type of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. …	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.8`