rlScheduledReloadPendingDate
HPE-rndMng ·
.1.3.6.1.4.1.11.2.1.16
Object
scalar
OctetString
Displays the most recently requested scheduled-reload due date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no pending/scheduled reload request, string will be empty
Context
- MIB
- HPE-rndMng
- OID
.1.3.6.1.4.1.11.2.1.16- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rndMng
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-24
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rndSysId Identification of an nm device. The device type for each
integer clarifies the sysObjectID in MIB - II. | scalar | Integer32 | .1.3.6.1.4.1.11.2.1.1 |
| rlRebootDelay Setting the variable will cause the device to reboot rlRebootDelay timeticks
from the moment this variable was set.
If not set, the variable will return a value of 4294967295.
If … | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.1.10 |
| rlGroupManagement | node | - | .1.3.6.1.4.1.11.2.1.11 |
| rlPrivateMIBroot Indicates the object identifier of the private MIB root in this device. | scalar | ObjectIdentifier | .1.3.6.1.4.1.11.2.1.12 |
| rlRunningCDBequalToStartupCDB Indicates whether there are changes in running CDB that were not saved in flash. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.1.13 |
| rlClearMib Clear MIB value for scalars or tables:
Delete all entries for tables with dynamic entries.
Set table entries default values for table with static entries.
Set scalar default value. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.1.14 |
| rlScheduledReload Used for requesting a delayed reload of the device in a
specific desired time, should be configured in one of the following formats:
'athhmmddMM' , 'inhhhmmm' or '', setting this … | scalar | OctetString | .1.3.6.1.4.1.11.2.1.15 |
| rlScheduledReloadApprovedDate Displays the most recently approved/committed scheduled-reload date
in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7).
if there is no committed scheduled-re… | scalar | OctetString | .1.3.6.1.4.1.11.2.1.17 |
| rlScheduledReloadCommit commits the pending scheduled-reload request, and completes the transaction.
when this value is set to TRUE, the system is instructed to perform the
requested reload operation at … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.1.18 |
| rlSysNameTable Holds the current system name configuration. | table | - | .1.3.6.1.4.1.11.2.1.19 |
| rndAction This variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions require support of proprietery File exchang… | scalar | Enumeration | .1.3.6.1.4.1.11.2.1.2 |
| rlErrdisableLinkFlappingCause Enable/Disable Link flapping error disable in the switch. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.1.20 |
| rlDefaultSysName The default value for the administratively-assigned name for this managed node.
If the name is unknown, the value is the zero-length string. | scalar | OctetString | .1.3.6.1.4.1.11.2.1.21 |
| rlNextImageRequiresCDBDeletion Indicates whether the next image after reboot requires deletion of startup configuration. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.1.22 |
| rndFileName The name of the file used internally by nm for transferring
tables maintained by network devices, using a prorietary File
exchange protocol. | scalar | OctetString | .1.3.6.1.4.1.11.2.1.3 |
| rlSnmpVersionSupported Indicates the snmp versions that are supported by
this device. | scalar | OctetString | .1.3.6.1.4.1.11.2.1.4 |
| rlSnmpMibVersion Indicates the snmp support version that is supported by
this device. | scalar | Integer32 | .1.3.6.1.4.1.11.2.1.5 |
| rlCpuUtilEnable Enables measurement of the device CPU utilization.
In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute
and rlCpuUtilDuringLast5Minutes, the value … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.1.6 |
| rlCpuUtilDuringLastSecond Percentage of the device CPU utilization during last second.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or… | scalar | Integer32 | .1.3.6.1.4.1.11.2.1.7 |
| rlCpuUtilDuringLastMinute Percentage of the device CPU utilization during last minute.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or… | scalar | Integer32 | .1.3.6.1.4.1.11.2.1.8 |
| rlCpuUtilDuringLast5Minutes Percentage of the device CPU utilization during the last 5 minutes.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disa… | scalar | Integer32 | .1.3.6.1.4.1.11.2.1.9 |