rlIpv6HostForwardingTable
HPE-IPv6 ·
.1.3.6.1.4.1.11.2.129.11
Object
table
This entity's IPv6 host forwarding table.
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlipv6IcmpErrorRatelimitInterval The time interval between tokens being placed in the bucket,
each token represents a single ICMP error message.
The interval measured in milliseconds. | scalar | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.11.2.129.1 |
| rlIpNetToPhysicalTableClearTable This entity is used to clear all or specific-type entries from ipNetToPhysicalTable. | table | - | .1.3.6.1.4.1.11.2.129.10 |
| rlipv6EnabledByDefaultRemovedIfindex the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration b… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.129.12 |
| rlManagementIpv6 The system management IPv6 address which is kept between system mode changes | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.129.13 |
| rlManagementIpv6Action The system management IPv6 action:
clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6 | scalar | Enumeration | .1.3.6.1.4.1.11.2.129.14 |
| rlIpv6TunnelToIPv6DbTable This entity's IPv6 Tunnel if/addr/prefix table. | table | - | .1.3.6.1.4.1.11.2.129.15 |
| rlIpv6DefaultTC The default value inserted into the TC
field of the IPv6 header of datagrams originated at
this entity, whenever a TC value is not supplied
by the application. | scalar | Integer32 | .1.3.6.1.4.1.11.2.129.16 |
| rlIpv6DefaultUP The default value inserted into the User Priority
field in the 802.1q VLAN tag of IPv4 frames sent by the
CPU. | scalar | Integer32 | .1.3.6.1.4.1.11.2.129.17 |
| rlIpv6MtuSize Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.129.18 |
| rlInetStaticRouteAuxMappingTable This entity's IPv6 auxulary mapping table. Serves to map nexthop ipv6 address to on-link prefix ifindex | table | - | .1.3.6.1.4.1.11.2.129.19 |
| rlipv6IcmpErrorRatelimitBucketSize The maximum number of tokens stored in the bucket,
each token represents a single ICMP error message. | scalar | Integer32 | .1.3.6.1.4.1.11.2.129.2 |
| rlipv6LLDefaultZone The interface which would be used as the egress interface
for packets sent without a specified IPv6Z interface identifier
or with the default '0' identifier. Zero value means no d… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.11.2.129.3 |
| rlIpv6GeneralPrefixTable This table defines general prefix description,
based on which a number of longer, more specific, prefixes can
be defined. | table | - | .1.3.6.1.4.1.11.2.129.4 |
| rlipv6MaximumHopsNumber Maximum number of hops used in router advertisements and all IPv6 packets that
are originated by the router. | scalar | Integer32 | .1.3.6.1.4.1.11.2.129.5 |
| rlIpv6RouterAdvertPrefixTable This table defines IPv6 prefixes which are included in IPv6 Neighbor
Discovery (ND) router advertisements. | table | - | .1.3.6.1.4.1.11.2.129.6 |
| rlIpv6RouterAdvertTable This table is parallel to inetCidrRouteTable, and is used to
configure or display additional route parameters. | table | - | .1.3.6.1.4.1.11.2.129.7 |
| rlipv6InetCidrTableClear This scalar indicates to clear all ipv6 routes from inetCidrTable. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.129.8 |
| rlIpv6PathMtuTable This table used to represent all Path MTU changes to specific destination
received from 'packet-too-big' messages. | table | - | .1.3.6.1.4.1.11.2.129.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlIpv6HostForwardingEntry A particular Static(user configured) route to a particular destination. | row | - | .1.3.6.1.4.1.11.2.129.11.1 |