rsRipEnable
HPE-IP ·
.1.3.6.1.4.1.11.2.26.9
Object
scalar
r/w
Enumeration
Enables, disables or shutdown (doesn't delete configuration) RIP.
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
3 | shutdown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rsIpAddrTable This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects. | table | - | .1.3.6.1.4.1.11.2.26.1 |
| rsTelnetPassword | scalar | OctetString | .1.3.6.1.4.1.11.2.26.11 |
| rlTranslationNameToIpTable This table translates IP interfaces's name to
IP interface's address | table | - | .1.3.6.1.4.1.11.2.26.12 |
| rlIpRoutingProtPreference | node | - | .1.3.6.1.4.1.11.2.26.13 |
| rlOspf | node | - | .1.3.6.1.4.1.11.2.26.14 |
| rlIpAddrTableMibVersion The IpAddrTable MIB's version. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.26.15 |
| rlIpCidrRouteExtTable Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only | table | - | .1.3.6.1.4.1.11.2.26.16 |
| rlIpStaticRoute | node | - | .1.3.6.1.4.1.11.2.26.17 |
| rlIpRouter | node | - | .1.3.6.1.4.1.11.2.26.18 |
| icmpSpec | node | - | .1.3.6.1.4.1.11.2.26.2 |
| rlIpAddressesNumber This variable specifies current number of entries in rsIpAddrTable. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.26.23 |
| rlIpStaticPrefixesNumber This variable specifies current number of static prefixes in the system. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.26.24 |
| rlIpTotalPrefixesNumber This variable specifies current total number of prefixes in the system. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.26.25 |
| rip2Spec | node | - | .1.3.6.1.4.1.11.2.26.3 |
| rlManagementIpv4 The system management IPv4 address which is kept between system modes changes | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.26.32 |
| rlManagementIpv4Action The system management IPv4 action:
clear - delete all ipv4 interfaces from startup configuration database except rlManagementIpv4 | scalar | Enumeration | .1.3.6.1.4.1.11.2.26.33 |
| rlManagementIpIfindex The system management IPs addresses ifIndex which is kept between system modes changes | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.26.34 |
| rlSourceAddressSelectionTable The table specifies IPv4 and IPv6 source
interfaces per application. Only supported
applications are present in the table. | table | - | .1.3.6.1.4.1.11.2.26.35 |
| rlIpAddressTable This table is parralel to MIB II ipAddressTable, and is used to
add/delete entries to/from that table.
The table contains addressing information relevant to the
entity's interface… | table | - | .1.3.6.1.4.1.11.2.26.36 |
| rlIpDefaultDSCP The default value inserted into the DSCP
field of the IP header of datagrams originated at
this entity, whenever a DSCP value is not supplied
by the application. | scalar | Integer32 | .1.3.6.1.4.1.11.2.26.37 |
| rlIpDefaultUP The default value inserted into the User Priority
field in the 802.1q VLAN tag of IPv4 frames sent by the
CPU. | scalar | Integer32 | .1.3.6.1.4.1.11.2.26.38 |
| rlIpv4MtuSize Sets the maximum transmission unit (MTU) size in bytes of IPv4 packets (payload). | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.26.39 |
| arpSpec | node | - | .1.3.6.1.4.1.11.2.26.4 |
| rlIcmpCountersClear clear - delete all icmp counters | scalar | Enumeration | .1.3.6.1.4.1.11.2.26.40 |
| rlIpCountersClear clear - delete all ip counters | scalar | Enumeration | .1.3.6.1.4.1.11.2.26.41 |
| rlManagementIpPortIfindex The system management port ifIndex | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.26.42 |
| tftp | node | - | .1.3.6.1.4.1.11.2.26.5 |
| ipRedundancy | node | - | .1.3.6.1.4.1.11.2.26.6 |
| ipRouteLeaking | node | - | .1.3.6.1.4.1.11.2.26.7 |
| ipRipFilter | node | - | .1.3.6.1.4.1.11.2.26.8 |