snOspfVirtIfStatusState
HP-SN-OSPF-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.8
Object
column
mandatory
Enumeration
The OSPF virtual interfaces states.
Context
- MIB
- HP-SN-OSPF-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- snOspfVirtIfStatusEntry
- Table
- snOspfVirtIfStatusTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | down |
4 | pointToPoint |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snOspfVirtIfStatusEntryIndex mandatory The table entry index of this Area. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.1 |
| snOspfVirtIfStatusAuthType mandatory The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.10 |
| snOspfVirtIfStatusAuthKey mandatory If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, snOspfVifAuthKey always returns a string of
length zero. | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.11 |
| snOspfVirtIfStatusMd5AuthKeyId mandatory The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.12 |
| snOspfVirtIfStatusMd5AuthKey mandatory The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.13 |
| snOspfVirtIfStatusMd5ActivationWaitTime mandatory The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.14 |
| snOspfVirtIfStatusAreaIdFormat mandatory This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP A… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.15 |
| snOspfVirtIfStatusAreaID mandatory The Transit Area that the Virtual Link traverses. By
definition, this is not 0.0.0.0 | column | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.2 |
| snOspfVirtIfStatusNeighbor mandatory The Router ID of the Virtual Neighbor. | column | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.3 |
| snOspfVirtIfStatusTransitDelay mandatory The estimated number of seconds it takes to transmit a
link- state update packet over this interface. | column | UpToMaxAge | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.4 |
| snOspfVirtIfStatusRetransInterval mandatory The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | UpToMaxAge | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.5 |
| snOspfVirtIfStatusHelloInterval mandatory The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for the virtual neighbor. | column | HelloRange | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.6 |
| snOspfVirtIfStatusRtrDeadInterval mandatory The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This va… | column | PositiveInteger | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.7 |
| snOspfVirtIfStatusEvents mandatory The number of state changes or error events on
this Virtual Link. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.9 |