snOspfIfStatusMd5AuthKeyId
HP-SN-OSPF-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19
Object
column
mandatory
Integer32
The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
Context
- MIB
- HP-SN-OSPF-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- snOspfIfStatusEntry
- Table
- snOspfIfStatusTable
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snOspfIfStatusEntryIndex mandatory The table entry index of this Area. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.1 |
| snOspfIfStatusHelloInterval mandatory The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network. | column | HelloRange | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.10 |
| snOspfIfStatusRtrDeadInterval mandatory The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This va… | column | PositiveInteger | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.11 |
| snOspfIfStatusState mandatory The OSPF Interface State. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.12 |
| snOspfIfStatusDesignatedRouter mandatory The IP Address of the Designated Router. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.13 |
| snOspfIfStatusBackupDesignatedRouter mandatory The IP Address of the Backup Designated Router. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.14 |
| snOspfIfStatusEvents mandatory The number of times this OSPF interface has changed
its state, or an error has occurred. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.15 |
| snOspfIfStatusAuthType mandatory The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.16 |
| snOspfIfStatusAuthKey mandatory The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.17 |
| snOspfIfStatusMetricValue mandatory The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed. | column | Metric | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.18 |
| snOspfIfStatusPort mandatory The physical router port of this OSPF interface. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.2 |
| snOspfIfStatusMd5AuthKey mandatory The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When re… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.20 |
| snOspfIfStatusMd5ActivationWaitTime mandatory The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.21 |
| snOspfIfStatusAreaIdFormat mandatory This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP A… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.22 |
| snOspfIfStatusIpAddress mandatory The IP address of this OSPF interface. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.3 |
| snOspfIfStatusAreaId mandatory A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone. | column | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.4 |
| snOspfIfStatusType mandatory The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, t… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.5 |
| snOspfIfStatusAdminStat mandatory The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an int… | column | RtrStatus | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.6 |
| snOspfIfStatusRtrPriority mandatory The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligi… | column | DesignatedRouterPriority | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.7 |
| snOspfIfStatusTransitDelay mandatory The estimated number of seconds it takes to transmit a
link- state update packet over this interface. | column | UpToMaxAge | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.8 |
| snOspfIfStatusRetransInterval mandatory The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | UpToMaxAge | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.9 |