snOspfIfRtrDeadInterval
HP-SN-OSPF-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.8
Object
column
obsolete
r/w
PositiveInteger
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Context
- MIB
- HP-SN-OSPF-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.8- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- snOspfIfEntry
- Table
- snOspfIfTable
- Siblings
- 19
Syntax
PositiveInteger
- Source
- PositiveInteger
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snOspfIfPort obsolete The physical router port of this OSPF interface. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.1 |
| snOspfIfAuthKey obsolete The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.10 |
| snOspfIfMetricValue obsolete The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.11 |
| snOspfIfRowStatus obsolete This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.12 |
| snOspfIfMd5AuthKeyId obsolete The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
ke… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.13 |
| snOspfIfMd5AuthKey obsolete The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When re… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.14 |
| snOspfIfMd5ActivationWaitTime obsolete The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.15 |
| snOspfIfAreaIdFormat obsolete This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP A… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.16 |
| snOspfIfPassiveMode obsolete This object control the passive mode of this interface. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.17 |
| snOspfIfDatabaseFilterAllOut obsolete This object control the filtering of outgoing OSPF LSA on this interface. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.18 |
| snOspfIfMtuIgnore obsolete This object control MTU detection mode of this interface. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.19 |
| snOspfIfAreaId obsolete A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone. | column | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.2 |
| snOspfIfNetworkP2mp obsolete This object enable/disable P2MP mode of this interface. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.20 |
| snOspfIfAdminStat obsolete The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an int… | column | RtrStatus | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.3 |
| snOspfIfRtrPriority obsolete The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligi… | column | DesignatedRouterPriority | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.4 |
| snOspfIfTransitDelay obsolete The estimated number of seconds it takes to transmit a
link- state update packet over this interface. | column | UpToMaxAge | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.5 |
| snOspfIfRetransInterval obsolete The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | UpToMaxAge | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.6 |
| snOspfIfHelloInterval obsolete The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network. | column | HelloRange | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.7 |
| snOspfIfAuthType obsolete The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.9 |