mplsTunnelIndexNext
HP-SN-MPLS-TE-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.1
Object
scalar
Integer32
This object contains the next appropriate value to be used for mplsTunnelIndex when creating entries in mplsTunnelTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the value of mplsTunnelIndex for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
Context
- MIB
- HP-SN-MPLS-TE-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.1- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- mplsTeObjects
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelCRLDPResTable The mplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these att… | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10 |
| mplsTunnelTrapEnable If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.11 |
| mplsTunnelTable The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point t… | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2 |
| mplsTunnelHopListIndexNext This object contains an appropriate value to be used
for mplsTunnelHopListIndex when creating entries in
the mplsTunnelHopTable. If the number of
unassigned entries is exhausted,… | scalar | Unsigned32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3 |
| mplsTunnelHopTable The mplsTunnelHopTable is used to indicate the hops,
strict or loose, for an MPLS tunnel defined in
mplsTunnelTable, when it is established via
signaling, for the outgoing directi… | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4 |
| mplsTunnelResourceIndexNext This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is… | scalar | Unsigned32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.5 |
| mplsTunnelResourceTable The mplsTunnelResourceTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels to
point to a single entry in this … | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6 |
| mplsTunnelARHopTable The mplsTunnelARHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in mplsTunnelTable, as reported by the MPLS
signaling protocol, for the outgoing… | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7 |
| mplsTunnelCHopTable The mplsTunnelCHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in mplsTunnelTable, as computed by a constraint-
based routing protocol, based on… | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8 |
| mplsTunnelPerfTable This table provides per-tunnel MPLS performance
information. | table | - | .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9 |