mplsLabelStackIndexNext

HP-SN-MPLS-LSR-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11
MIB view Table view

Object

scalar Unsigned32 
This object contains an appropriate value to be used
for mplsLabelStackIndex when creating entries in the
mplsLabelStackTable.  The value 0 indicates that no
unassigned entries are available.  To obtain an
mplsLabelStackIndex value for a new entry, the
manager issues a management protocol retrieval
operation to obtain the current value of this
object.  After each retrieval operation, the agent
should modify the value to reflect the next
unassigned index.  After a manager retrieves a value
the agent will determine through its local policy
when this index value will be made available for
reuse.

Context

MIB
HP-SN-MPLS-LSR-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11
Type
scalar
Access
readonly
Status
current
Parent
mplsLsrObjects
Siblings
14

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsInterfaceConfTable
This table specifies per-interface MPLS capability and associated information.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1
mplsMaxLabelStackDepth
The maximum stack depth supported by this LSR.
scalarInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.10
mplsLabelStackTable
This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12
mplsTrafficParamIndexNext
This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicates that no unassigne…
scalarUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.13
mplsTrafficParamTable
This table specifies the Traffic Parameter objects for in and out-segments.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14
mplsXCTrapEnable
If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.15
mplsInterfacePerfTable
This table provides MPLS performance information on a per-interface basis.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2
mplsInSegmentTable
This table contains a collection of incoming segments to an LSR.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3
mplsInSegmentPerfTable
This table contains statistical information for incoming MPLS segments to an LSR.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4
mplsOutSegmentIndexNext
This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhaus…
scalarUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.5
mplsOutSegmentTable
This table contains a representation of the outgoing segments from an LSR.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6
mplsOutSegmentPerfTable
This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface.
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7
mplsXCIndexNext
This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries are available. To…
scalarUnsigned32.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.8
mplsXCTable
This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsLabelStackTable spe…
table-.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9