snVrrpVirRtrTrackPortMask
HP-SN-IP-VRRP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13
Object
column
obsolete
r/w
OctetString
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)
Context
- MIB
- HP-SN-IP-VRRP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- snVrrpVirRtrEntry
- Table
- snVrrpVirRtrTable
- Siblings
- 27
Syntax
OctetString
Values & Constraints
Object Constraints
range: 4-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snVrrpVirRtrPort obsolete The IP port of this VRRP interface. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 |
| snVrrpVirRtrState obsolete This object specifies the VRRP Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 |
| snVrrpVirRtrActivate obsolete This object specifies the VRRP Router's activate command as:
disabled(0)...deactivate this VRRP Router.
enabled(1)....activate this VRRP Router. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 |
| snVrrpVirRtrIpAddrMask obsolete The numbers of IP Addresses of this virtual router of this interface. | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 |
| snVrrpVirRtrTrackVifMask obsolete This object specifies the identity of the virtual interface
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is config… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 |
| snVrrpVirRtrRowStatus obsolete This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 |
| snVrrpVirRtrRxArpPktDropCnts obsolete The received VRRP ARP Packet Drop Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 |
| snVrrpVirRtrRxIpPktDropCnts obsolete The received VRRP IP Packet Drop Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 |
| snVrrpVirRtrRxPortMismatchCnts obsolete The received VRRP Port mismatching Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 |
| snVrrpVirRtrRxNumOfIpMismatchCnts obsolete The received VRRP Number of IP Addresses mismatching Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 |
| snVrrpVirRtrId obsolete One of the virtual router ID of this VRRP interface. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 |
| snVrrpVirRtrRxIpMismatchCnts obsolete The received VRRP IP Address mismatching Counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 |
| snVrrpVirRtrRxHelloIntMismatchCnts obsolete The counts of the virtual router interface with hello interval mismatch counts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 |
| snVrrpVirRtrRxPriorityZeroFromMasterCnts obsolete The counts of the virtual router interface with Priority zero from the master. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 |
| snVrrpVirRtrRxHigherPriorityCnts obsolete The counts of the virtual router interface with higher Priority. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 |
| snVrrpVirRtrTransToMasterStateCnts obsolete The counts of the virtual router interface transition to master state. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 |
| snVrrpVirRtrTransToBackupStateCnts obsolete The counts of the virtual router interface transition to backup state. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 |
| snVrrpVirRtrCurrDeadInt obsolete Current Dead interval (in 100 milliseconds). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 |
| snVrrpVirRtrTrackPortList obsolete This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the oth… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27 |
| snVrrpVirRtrTrackVifPortList obsolete This object specifies the identity of the virtual interface
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. Default value
is 0 leng… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28 |
| snVrrpVirRtrOwnership obsolete The ownership of this VRRP router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this VRRP ro… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 |
| snVrrpVirRtrCfgPriority obsolete The higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher prior… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 |
| snVrrpVirRtrTrackPriority obsolete The higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track p… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 |
| snVrrpVirRtrCurrPriority obsolete The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 |
| snVrrpVirRtrHelloInt obsolete Time interval between advertisements (seconds). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 |
| snVrrpVirRtrDeadInt obsolete Dead interval (seconds). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 |
| snVrrpVirRtrPreemptMode obsolete This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 |