snFsrpIfIpAddress
HP-SN-IP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2
Object
The IP Address of the physical router port of this interface.
Context
- MIB
- HP-SN-IP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- snFsrpIfEntry
- Table
- snFsrpIfTable
- Siblings
- 11
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snFsrpIfPort mandatory The physical router port of this FSRP interface. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1 |
| snFsrpIfRouterDeadTime mandatory The hold time of the Fsrp router is from 3 to 255 seconds. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10 |
| snFsrpIfChassisTrackPortMask obsolete This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then … | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11 |
| snFsrpIfTrackPortList mandatory This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the ot… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.12 |
| snFsrpIfVirRtrIpAddr mandatory The IP Address of the Virtual Router for the interface.
The Virtual Router IP address need to be configured on
the interface before Redundant Router Function can operate
on the i… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3 |
| snFsrpIfOtherRtrIpAddr mandatory The IP Address of the Other Router on this ip subnet
that operates FSRP and to whom the Keep Alive message
need to be sent by this router. This object must be
configured for FSRP… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4 |
| snFsrpIfPreferLevel mandatory The higher the number the higher the priority is.
This parameter decides which router should becomes
the Active Router for the interface. A Router with
higher priority selected t… | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5 |
| snFsrpIfTrackPortMask obsolete This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then … | column | PortMask | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6 |
| snFsrpIfRowStatus mandatory This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7 |
| snFsrpIfState mandatory This object specifies the FSRP Router's interface state as:
init(0)...initialization state.
negotiating(1)...negotiating state.
standby(2)...standby state.
active(3)...active stat… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8 |
| snFsrpIfKeepAliveTime mandatory The heart-beat is from 1 to 120 seconds. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9 |