snAgAclSourceMask
HP-SN-IP-ACL-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.7
Object
Source IP subnet mask.
Context
- MIB
- HP-SN-IP-ACL-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- snAgAclEntry
- Table
- snAgAclTable
- Siblings
- 28
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snAgAclIndex The access control list item number for an entry.
This is a unique number that identifies different
Access list entries combined with the access list
name and access list number. … | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.1 |
| snAgAclSourceOperand2 For now this only refers to transport
protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.10 |
| snAgAclDestinationIp Destination IP address. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.11 |
| snAgAclDestinationMask Destination IP subnet mask. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.12 |
| snAgAclDestinationOperator Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number | column | Operator | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.13 |
| snAgAclDestinationOperand1 For now this only refers to transport
protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.14 |
| snAgAclDestinationOperand2 For now this only refers to transport
protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.15 |
| snAgAclPrecedence This refers to IP precedence value in the range <0-7>
critical(5),
flash(3),
flash-override(4),
immediate(2),
internet(6),
network(7),
priority(1),
routine(0) | column | PrecedenceValue | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.16 |
| snAgAclTos This refers to the IP type of service value in range
<0-15> which is the sum of numeric vlaues of the
following options -
match packets with maximum reliability TOS (2)
match pac… | column | TosValue | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.17 |
| snAgAclEstablished Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol. | column | RtrStatus | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.18 |
| snAgAclLogOption Log flag | column | TruthVal | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.19 |
| snAgAclNumber The access control list number for an entry.
The standard access list is in the range <1..99>.
The extended access list is in the range <100-199>. | column | AclNumber | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.2 |
| snAgAclStandardFlag Return whether the ACL is standard or extended, 1 for standard ACL | column | TruthVal | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.20 |
| snAgAclRowStatus To create or delete a access list
entry. | column | SnRowStatus | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.21 |
| snAgAclFlowCounter Approximate count of flows matching individual ACL entry. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.22 |
| snAgAclPacketCounter Accurate count of packets matching individual ACL entry. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.23 |
| snAgAclComments Remark description of individual ACL entry. | column | DisplayString | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.24 |
| snAgAclIpPriority QoS priority option for IP ACL entry. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.25 |
| snAgAclPriorityForce Force packet outgoing priority. Not defined(4) | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.26 |
| snAgAclPriorityMapping Map incoming packet priority. Not defined(8) | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.27 |
| snAgAclDscpMarking Mark packets with given DSCP value. Not defined(64) | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.28 |
| snAgAclDscpMapping Map incoming DSCP value. Not defined(64) | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.29 |
| snAgAclName ACL name for an entry. | column | DisplayString | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.3 |
| snAgAclAction Action to take if the ip packet matches
with this access control list. | column | Action | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.4 |
| snAgAclProtocol Transport protocol. 0 means any protocol. | column | IpProtocol | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.5 |
| snAgAclSourceIp Source IP address. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.6 |
| snAgAclSourceOperator Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number | column | Operator | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.8 |
| snAgAclSourceOperand1 For now this only refers to transport
protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.9 |