snBgp4RouteMapSetNextHop

HP-SN-BGP4-GROUP-MIB · .1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11
MIB view Table view

Object

column mandatory r/w RFC1155-SMIIpAddress 
To modify the IP address of the next hop for BGP routes.

Context

MIB
HP-SN-BGP4-GROUP-MIB
OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11
Type
column
Access
readwrite
Status
mandatory
Parent
snBgp4RouteMapSetEntry
Table
snBgp4RouteMapSetTable
Siblings
19

Syntax

RFC1155-SMIIpAddress
Source
RFC1155-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snBgp4RouteMapSetMapName mandatory
An octet string of the route-map name, each character of the name is represented by one octet.
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1
snBgp4RouteMapSetMetric mandatory
To modify a metric for BGP routes.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10
snBgp4RouteMapSetOrigin mandatory
To set the BGP origin code.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12
snBgp4RouteMapSetTag mandatory
To specify the tag for BGP routes.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13
snBgp4RouteMapSetWeight mandatory
To specify the BGP weight for the routing table.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14
snBgp4RouteMapSetRowMask mandatory
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each r…
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15
snBgp4RouteMapSetCommunityNums mandatory
Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs.
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16
snBgp4RouteMapSetDampenHalfLife mandatory
Bgp4 Route Map Dampening Half Life.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.17
snBgp4RouteMapSetDampenReuse mandatory
Bgp4 Route Map Dampening Reuse.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.18
snBgp4RouteMapSetDampenSuppress mandatory
Bgp4 Route Map Dampening Suppress.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.19
snBgp4RouteMapSetSequenceNum mandatory
A sequence number for this particular route-map.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2
snBgp4RouteMapSetDampenMaxSuppress mandatory
Bgp4 Route Map Dampening Max Suppress Time.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.20
snBgp4RouteMapSetAsPathType mandatory
To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsP…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3
snBgp4RouteMapSetAsPathString mandatory
as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1).
columnOctetString.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4
snBgp4RouteMapSetAutoTag mandatory
To enable/disable the automatic-tag for BGP routes.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5
snBgp4RouteMapSetCommunityType mandatory
To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5…
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6
snBgp4RouteMapSetCommunityNum obsolete
community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0).
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7
snBgp4RouteMapSetCommunityAdditive mandatory
To add the community to the already existing communities.
columnEnumeration.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8
snBgp4RouteMapSetLocalPreference mandatory
To modify a local-preference for BGP routes.
columnInteger32.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9