hpicfUsrProfileConfigTaggedEgressVlanMap1k
HP-ICF-USER-PROFILE-MIB ·
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.4
Object
column
r/w
OctetString
A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 0 through 1023.
The first octet corresponds to VLANs with 'VlanIndex'
values of 0 through 7, the second octet to VLANs 8
through 15, etc. The most significant bit of each octet
corresponds to the lowest 'VlanIndex' value in that
octet. Bit 0 in the 1K map is ignored/discarded.
If variable hpicfUsrProfileConfigPvidEnable is TRUE,
some bit other than bit 0 in the 1K map must be set.
To specify an empty tagged vlan map, vlanIndex value
4095 in the 4K map must be set.
Setting a bit to '1' specifies the usage the
corresponding VLAN with this access profile.
Context
- MIB
- HP-ICF-USER-PROFILE-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfUsrProfileConfigEntry
- Table
- hpicfUsrProfileConfigTable
- Siblings
- 17
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfUsrProfileConfigIndex A unique numeric value assigned to each
access profile in this table. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.1 |
| hpicfUsrProfileConfigPriorityRegenTable Specifies the IEEE 802 priority regeneration table
for this access profile. Syntax of octet string
is same as for 'User-Priority-Table' RADIUS attribute
as defined in RFC4675. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.10 |
| hpicfUsrProfileConfigPriorityRegenTableEnable Setting this attribute TRUE enables the usage of
the 'hpicfUsrProfilePriorityRegenTable' when this
access profile is active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.11 |
| hpicfUsrProfileConfigMaxIngressBandwidth Specifies the maximum ingress bandwidth for this
access profile. Bandwidth value is specified in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.12 |
| hpicfUsrProfileConfigMaxIngressBandwidthEnable Setting this attribute TRUE enables the usage of
the 'hpicfUsrProfileMaxIngressBandwidth' when this
access profile is active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.13 |
| hpicfUsrProfileConfigMaxEgressBandwidth Specifies the maximum egress bandwidth for this
access profile. Bandwidth value is specified in Kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.14 |
| hpicfUsrProfileConfigMaxEgressBandwidthEnable Setting this attribute TRUE enables the usage of
'hpicfUsrProfileMaxEgressBandwidth' when this
access profile is active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.15 |
| hpicfUsrProfileConfigFilterListIndex Selects the filter from
'hpicfUsrProfileConfigFilterTable' to associate with
this access profile. The rowStatus of the filter must
be in an active state. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.16 |
| hpicfUsrProfileConfigFilterListEnable Setting this attribute TRUE enables the usage of
'hpicfUsrProfileConfigFilterListIndex' when this access
profile is active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.17 |
| hpicfUsrProfileConfigEntryRowStatus This object indicates the status of this
entry. Must NOT be active in order to change
some other column of this config entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.18 |
| hpicfUsrProfileConfigPvid Specifies the port VID (PVID), also known,
as native VLAN to be used with this access
profile. To specify no pvid, set value to
4095, not 0. | column | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.2 |
| hpicfUsrProfileConfigPvidEnable Setting this attribute TRUE enables the
usage of 'hpicfUsrProfilePvid' when this
access profile is active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.3 |
| hpicfUsrProfileConfigTaggedEgressVlanMap2k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 1024 through 2047.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.5 |
| hpicfUsrProfileConfigTaggedEgressVlanMap3k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 2048 through 3071.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.6 |
| hpicfUsrProfileConfigTaggedEgressVlanMap4k A string of octets containing one bit per VLAN
for VLANS with 'VlanIndex' values of 3072 through 4095.
The first octet corresponds to VLANs with 'VlanIndex'
val… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.7 |
| hpicfUsrProfileConfigTaggedEgressVlanEnable Setting this attribute TRUE enables the
usage of 'hpicfUsrProfileTaggedVlanMapXXX' when this
access profile is being enforced. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.8 |
| hpicfUsrProfileConfigIngressVlanFilterEnable Setting this attribute TRUE causes the system to only
allow ingress traffic from those VLANs on which egress
traffic is permitted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.9 |