hpicfUrpfConfigDefRoute

HP-ICF-URPF-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.4
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Allow use of the default route when checking the ingress
port. Enabling use of the default route is only supported
in strict mode. If use of the default route was enabled in
loose mode, all packets would be allowed, therefore this
option is not supported in loose mode.
true(1)  - enable use of default route in port match;
false(2) - disable use of default route in port match.

Context

MIB
HP-ICF-URPF-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.4
Type
column
Access
readwrite
Status
current
Parent
hpicfUrpfConfigEntry
Table
hpicfUrpfConfigTable
Siblings
9

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfUrpfIfIndex
The interface for the table entry.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.1
hpicfUrpfConfigAllowlistAclName
The URPF allowlist ACL name. The ACL must already exist at the time of application.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.10
hpicfUrpfAddrFamily
The address family for the table entry.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.2
hpicfUrpfConfigMode
The URPF match mode. URPF operates in one of two modes: strict and loose. In strict mode, a route to the source address must exist, and the ingress interface of the packet must be…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.3
hpicfUrpfConfigAllowDhcp
Allow packets with SA=0.0.0.0 and DA=255.255.255.255, such as DHCP and BOOTP, to bypass the URPF checks. true(1) - packets will bypass URPF checks; false(2) packets will be drop…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.5
hpicfUrpfConfigLogging
Is logging of dropped packets enabled. true(1) - logging enabled; false(2) - logging disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.6
hpicfUrpfConfigHasWhitelistAcl
Is a whitelist ACL applied to this interface. true(1) - whitelist ACL applied; false(2) - whitelist ACL not applied.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.7
hpicfUrpfConfigWhitelistAclName
The URPF whitelist ACL name. The ACL must already exist at the time of application.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.8
hpicfUrpfConfigHasAllowlistAcl
Is a allowlist ACL applied to this interface. true(1) - allowlist ACL applied; false(2) - allowlist ACL not applied.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.131.1.3.1.9