hpicfTunneledNodeRowStatus

HP-ICF-TUNNELED-NODE-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.8

Object

column r/w SNMPv2-TCRowStatus

The status of this conceptual row in hpicfTunneledNodeTable.
              
This object takes values of createAndGo (4),
createAndWait (5), active (1) and destroy (6) as part
of a SNMP request.
              
A value of createAndGo (4) indicates that all the
required columns are configured within this request
and the profile will be set to active, if the request
succeeds.
              
A value of createAndWait (5) indicates that some of the
required columns are not configured within this request
and the profile be set to notReady, if the request
succeeds.
              
A value of active (1) is used to set the profile to active
state from notReady state. A request with active would
succeed only if all the required columns are already
configured.
              
A value of destroy (6) is used to delete the profile.
              
A conceptual row in this table can be in either of
the following states: active (1) and notReady (3).
              
A value of active (1) indicates that all the required
columns are appropriately configured and the profile
can be applied on ports.
              
A value of notReady (3) indicates that one or more of the
required columns are not configured yet and the profile
cannot be applied on ports.
              
The following are the required columns:
    Controller IP (hpicfTunneledNodePrimaryAddr).
              
When the profile is in use on any port, the values of
required columns cannot be modified.
              
When the profile is in use on any port, the corresponding
conceptual row can not be deleted.

Context

MIB: HP-ICF-TUNNELED-NODE-MIB
OID: .1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.8
Type: column
Access: readwrite
Status: current
Parent: hpicfTunneledNodeEntry
Table: hpicfTunneledNodeTable
Siblings: 12

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hpicfTunneledNodeIndex The index of a Tunneled Node profile in hpicfTunneledNodeTable. Only one Tunneled Node profile can be created.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.1`
hpicfTunneledNodeVlanMode The Tunneled Node Vlan-Mode can be vlan-extend or no-vlan.	column	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.10`
hpicfTunneledNodeReservedVlanId The reserved VLAN ID for PUTN feature when Mode is role-based and Vlan-Mode is No-VLAN.	column	Q-BRIDGE-MIBVlanIndex	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.11`
hpicfTunneledNodeMPeriod Specifies a period in hours, after which an authenticated user based tunnelled client will be deauthenticated.A value of 0 signifies that maintenance-timer is not configured.	column	hour Integer32	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.12`
hpicfTunneledNodeWolVIDList A list of VLANs on which UBT wake-on-lan is enabled. This configuration will take effect only for UBT Vlan-extend-enale mode.A maximum of 100 Vlans can be configured.	column	HP-ICF-TCVidList	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.13`
hpicfTunneledNodeEnable Provides the status of Tunneled Node protocol.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.2`
hpicfTunneledNodePrimaryAddrType The type of address in hpicfTunneledNodePrimaryAddr.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.3`
hpicfTunneledNodePrimaryAddr The address of a known Controller.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.4`
hpicfTunneledNodeBackupAddrType The type of address in hpicfTunneledNodeBackupAddr.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.5`
hpicfTunneledNodeBackupAddr The address of a known Backup Controller.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.6`
hpicfTunneledNodeTimeout The keep alive timeout between a switch and a controller.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.7`
hpicfTunneledNodeMode The Tunneled Node Mode can be Per port or per user.	column	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.9`