hpicfRpvstPortIeeeRstBpdu

HP-ICF-RPVST-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.10
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
The hpicfRpvstPortIeeeRstBpdu controls, on a per
port basis, whether or not IEEE RST BPDUs will be
transmitted and received on VLANs that the port is
an untagged member of. The value true(1) means that
the port will allow transmission and reception of
IEEE RST BPDUs on ports untagged to a VLAN while
false(2) means it will not.

Context

MIB
HP-ICF-RPVST-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.10
Type
column
Access
readwrite
Status
current
Parent
hpicfRpvstPortEntry
Table
hpicfRpvstPortTable
Siblings
9

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfRpvstPortIndex
The port number
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.1
hpicfRpvstPortAdminEdge
The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.2
hpicfRpvstPortAdminPointToPoint
Refer the PointToPoint textual-convention.
columnPointToPoint.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.3
hpicfRpvstPortAutoEdge
It is used by the Bridge detection state machine for the automatic identification of edge ports.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.4
hpicfRpvstPortBpduFiltering
This value indicates whether or not BPDUs need to be filtered on this port. If the value is true(1) the received BPDUs will be dropped and no BPDUs will be transmitted on the …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.5
hpicfRpvstPortRestrictedTcn
This value indicates whether or not to propagate topology changes to other ports. true(1) causes the port not to propagate topology changes to other ports.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.6
hpicfRpvstPortRootGuard
Setting this object to true(1) forces port to not to be selected as root port even if this port has best spanning-tree.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.7
hpicfRpvstPortLoopGuard
Setting this object to true(1) causes the forwarding port to move to the blocking state and prevent the blocking port to move to forwarding state when no BPDUs are received, inste…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.8
hpicfRpvstPortBpduProtection
Setting this true (1) indicates that no BPDUs are expected to be received on this port. At the reception of BPDUs the BPDU protection mechanism will disable this port and port …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.88.1.3.1.9