hpSwitchProfPortSpeed
HP-ICF-DEV-CONF-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.9
Object
column
r/w
Enumeration
The port speed configuration associated with this profile.
Context
- MIB
- HP-ICF-DEV-CONF-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpSwitchDevProfEntry
- Table
- hpSwitchDevProfTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | halfDuplex10Mbits |
2 | halfDuplex100Mbits |
3 | fullDuplex10Mbits |
4 | fullDuplex100Mbits |
5 | autoNeg |
6 | fullDuplex1000Mbits |
7 | auto10Mbits |
8 | auto100Mbits |
9 | auto1000Mbits |
10 | auto10Gbits |
11 | auto10or100Mbits |
12 | auto40Gbits |
13 | auto2500Mbits |
14 | auto5000Mbits |
15 | auto2500or5000Mbits |
16 | auto1000or2500Mbits |
17 | auto1000or2500or5000Mbits |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchProfIndex The index value which uniquely identifies a row
in the profile table. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.1 |
| hpSwitchProfPoeMaxPower The maximum power allocation measured in watts (W) for
the port associated with this profile. This value must be
less than or equal to 33W. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.10 |
| hpSwitchProfPoePriority The PoE priority defined for the port associated with this
profile. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.11 |
| hpSwitchProfJumboFrameSupport The jumbo frame support status for the port
associated with this profile. Applying a
profile with jumbo frame support enabled
will also enable jumbo frame support for
all oth… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.12 |
| hpSwitchProfTunneledNodeSupport Configuration parameter to (dis)allow tunneled node
configuration on port when device profile is
applied. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.13 |
| hpSwitchProfMode Configure the mode for the profile. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.14 |
| hpSwitchProfPoeAllocateBy PoE Allocation method defined for port associated
with this profile. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.15 |
| hpSwitchProfRowStatus The row status of this device profile entry. Allows
creation/deletion of the device profile entry. Row cannot
be deleted if the device profile is associated with a
device. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.2 |
| hpSwitchProfName The name of the device profile. The maximum length
supported is 32 characters. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.3 |
| hpSwitchProfUntaggedVlanID The untagged VLAN ID associated with this profile. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.4 |
| hpSwitchProfTaggedVlanList The set of tagged VLANs associated with this profile. | column | HP-ICF-TCVidList | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.5 |
| hpSwitchProfIngressBandwidth The bandwidth percentage of ingress traffic allowed on
the port associated with this profile. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.6 |
| hpSwitchProfEgressBandwidth The bandwidth percentage of egress traffic allowed on
the port associated with this profile. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.7 |
| hpSwitchProfCosPriority The Class of Service (CoS) priority for traffic entering
the port associated with this profile. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.8 |