hpicfDot1xAuthAuthVid
HP-DOT1X-EXTENSIONS-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.1
Object
This object configures the PVID for the authorized 802.1x port. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the client's assigned role.
Context
- MIB
- HP-DOT1X-EXTENSIONS-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfDot1xAuthConfigEntry
- Table
- hpicfDot1xAuthConfigTable
- Siblings
- 9
Syntax
Q-BRIDGE-MIBVlanIndex
- Source
- Q-BRIDGE-MIBVlanIndex
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfDot1xAuthUnauthVidLLDPNwkPolicy Setting this attribute TRUE(1) will suppress
the transmission of LLDP Network Policy TLV
from port when an unauthorized client is placed
in unauth VLAN during 802.1x authenticatio… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.11 |
| hpicfDot1xAuthUnauthVid This object configures the PVID for the unauthorized
802.1x port. When hpSwitchAutzUserRoleEnabled is
true, this value may be superseded by the value of
hpSwitchAutzUserRoleVlanI… | column | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.2 |
| hpicfDot1xAuthUnauthPeriod This objects configures the period of time, in seconds,
which the authenticator will wait for authentication
before transitioning to guest VLAN mode, or assigning
the role identif… | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.3 |
| hpicfDot1xAuthClientLimit deprecated *************THIS OBJECT IS DEPRECATED **********
The maximum number of authenticated clients to allow on
the port. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.4 |
| hpicfDot1xAuthLogoffPeriod Specifies the period, in seconds, at which an
authenticated client will be considered unauthenticated
for a lack of activity (i.e. traffic originating
from client). | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.5 |
| hpicfDot1xAuthClientLimit2 The maximum number of authenticated clients to allow on
the port if greater than 0. If 0 then authenticator
controls port as a single entity - no client limit. | column | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.6 |
| hpicfDot1xAuthCachedReauthPeriod The value indicates the period in seconds, during which
cached reauthentication is allowed on the port. If
value is zero then the period of cached
reauthentication is unlimited. | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.7 |
| hpicfDot1xAuthEnforceCacheReauth Setting this attribute TRUE(1) will allow cached
reauthentication when server-timeout is configured
lesser than radius connection timeout or
when client initiates authentication b… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.8 |
| hpicfAuthMaxEapReq The value of the maxEapReq is used for sending
by Auth Order to send EAP Identity requests. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.9 |