prtgeneralcurrentlocalization
HP-Color-LaserJet-4500-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2
Object
scalar
optional
r/w
Integer32
The value of the prtLocalizationIndex corresponding to the
current language, country, and character set to be used for
localized string values that are identified as being dependent
on the value of this object. Note that this object does not
apply to localized strings in the prtConsole group or to any
object that is not explicitly identified as being localized
according to prtGeneralCurrentLocalization.
Additional information:
The value of this object is the current index which PML is using for prtLocalizationLanguage,
prtLocalizationCountry and prtLocalizationCharacterSet.
Context
- MIB
- HP-Color-LaserJet-4500-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- optional
- Parent
- prtGeneralEntry
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtgeneralconfigchanges optional Counts configuration changes that change the capabilities of
a printer, such as the addition/deletion of input/output bins,
the addition/deletion of interpreters, or changes in me… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.1 |
| prtconsolelocalization optional The value of the prtLocalizationIndex corresponding to
the language, country, and character set to be used for the
console. This localization applies both to the actual display
o… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.10 |
| prtconsolenumberofdisplaylines optional The number of lines on the printer's physical
display. This value is 0 if there are no lines on the
physical display or if there is no physical display
Additional informa… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.11 |
| prtconsolenumberofdisplaychars optional The number of characters per line displayed on the physical
display. This value is 0 if there are no lines on the
physical display or if there is no physical display | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.12 |
| prtconsoledisable optional If the object prtConsoleDisable has value
'operatorConsoleDisabled' then input is not accepted from the
operator console. If the object prtConsoleDisable has the value
'operatorCo… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.13 |
| prtgeneralstartuppage optional Used to enable or disable printing a startup page. If
enabled, a startup page will be printed shortly after
power-up, when the device is ready. Typical startup
pages include test … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.14 |
| prtgeneralbannerpage optional Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies
to all jobs, regardless of interpreter. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.15 |
| prtgeneralprintername optional An administrator-specified name for this printer.
Depending upon implementation of this printer, the value of this
object may or may not be same as the value for the MIB-II
'SysNa… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.16 |
| prtgeneralserialnumber optional A recorded serial number for this device that indexes some type
device catalog or inventory. This value is usually set by the
device manufacturer but the MIB supports the option … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.17 |
| prtalertcriticalevents optional A running counter of the number of critical alert events
that have been recorded in the alert table. The value of this
object is RESET in the event of a power cycle operation (i.e… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.18 |
| prtalertallevents optional A running counter of the total number of alert event entries
(critical and non-critical) that have been recorded in the
alert table | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.19 |
| prtgeneralreset optional Setting this value to `powerCycleReset', `resetToNVRAM', or
`resetToFactoryDefaults' will result in the resetting of the
printer. When read, this object will always have the valu… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.3 |
| prtgeneralcurrentoperator optional The name of the person who is responsible for operating
this printer. It is suggested that this string include
information that would enable other humans to reach the operator,
su… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.4 |
| prtgeneralserviceperson optional The name of the person responsible for servicing this
printer. It is suggested that this string include information
that would enable other humans to reach the service person, suc… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 |
| prtinputdefaultindex optional The value of prtInputIndex corresponding to the default input
sub-unit: that is, this object selects the default source of
input media.
This value shall be -1 if there is no defa… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6 |
| prtoutputdefaultindex optional The value of prtOutputIndex corresponding to the default
output sub-unit; that is, this object selects the default
output destination.
This value shall be -1 if there is no def… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.7 |
| prtmarkerdefaultindex optional The value of prtMarkerIndex corresponding to the
default marker sub-unit; that is, this object selects the
default marker.
Additional information:
LaserJet 4500 on… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.8 |
| prtmediapathdefaultindex optional The value of prtMediaPathIndex corresponding to
the default media path; that is, the selection of the
default media path.
Additional information:
This object can b… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.9 |