default-page-protect
HP-Color-LaserJet-4500-MIB ·
.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10
Object
scalar
optional
Enumeration
Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If eOn, then memory is reserved. If eAuto, the device determines the amount of memory to reserve. Additional information: This feature is not configurable in LaserJet 4500. Therefore, it will always be set to eAuto.
Context
- MIB
- HP-Color-LaserJet-4500-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10- Type
- scalar
- Access
- readonly
- Status
- optional
- Parent
- settings-pdl
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
3 | eAuto |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| default-lines-per-page optional Returns or changes the default number of lines per page.
The POS indicates the supported values. An unsupported
value causes the printer to use the closest supported
value, causi… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 |
| default-vmi optional Returns or changes the default vertical motion index.
The unit of measure for VMI is centipoints per line.
The POS indicates the supported values. An unsupported
value causes the… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 |
| default-media-size optional This indicates the default media size. A write of an
unsupported value causes an <badValue>.
Complete list of supported media sizes along
with their dimensions are listed in the … | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 |
| cold-reset-media-size optional Returns or sets the media size that is used as the
DEFAULT-MEDIA-SIZE when a cold reset occurs.
Additional information:
The NOT-IDLE object mentioned in the general description is… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 |
| default-media-name optional Returns or sets the media name that is used until the
media name is changed by a print job command.
Additional information:
This string must be the same as one of the
MEDIAn-NAME … | scalar | DisplayString | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 |
| reprint optional Returns or changes the reprint (jam recovery) setting.
If eOn, then the device will reprint pages jammed pages.
If eOff, the device will not attempt to reprint jammed
pages. If e… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 |
| default-bits-per-pixel optional Controls the number of levels used (per pixel) when
printing grayscale or color images.
Additional information:
This value is constant since LaserJet 4500 always expects eight bit… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 |
| default-copies optional Returns or changes default copies. Default copies is
the default values used by the PDL to control the number
of copies of each page in the print job that are
printed. The print… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 |
| form-feed optional Instructs the PDL processing sub-system to finishing
processing the current page of the current job. Form
feed is also known as close page or eject page. If the
PDL processing s… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 |
| resource-saving optional Returns or changes PDL resource saving. Resource saving
stores a PDL's permanent soft resources, like fonts,
even when another PDL is active. Resource saving is
also called envi… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 |
| default-vertical-black-resolution optional Returns or changes the value of the default vertical
black resolution. The units are dots per inch.
Additional information:
The value of this object is fixed since LaserJet 4500 … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 |
| default-horizontal-black-resolution optional Returns or changes the value of the default horizontal
black resolution. The units are dots per inch.
Additional information:
The value of this object is fixed since LaserJet 450… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 |