xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed
HOTWIRE-XDSL-INTERFACE-MIB ·
.1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.6
Object
column
mandatory
r/w
Enumeration
The value of this object corresponds to the lower bound for the upstream port speed of the specified port for adaptive port speed behaviour in kbps. If the port speed behaviour is fixed an error of noSuchName will be returned by the agent. The default value for this object s272.
Context
- MIB
- HOTWIRE-XDSL-INTERFACE-MIB
- OID
.1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- xdslDevIfConfigEntry
- Table
- xdslDevIfConfigTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | s272 |
2 | s408 |
3 | s544 |
4 | s680 |
5 | s816 |
6 | s952 |
7 | s1088 |
8 | s91 |
9 | s476 |
10 | s340 |
11 | s204 |
12 | s136 |
13 | s119 |
14 | s102 |
15 | s85 |
16 | s68 |
17 | s51 |
18 | s45 |
19 | s34 |
20 | s11 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xdslDevIfConfigIfIndex mandatory The value of this object corresponds directly to each xDSL
interface as described in ifTable. | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.1 |
| xdslDevIfConfigMarginThreshold mandatory The value of this object corresponds to the offset from
the startup margin. The threshold margin is calculated
by subtracting the offset from the startup margin.
Permissible rang… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.10 |
| xdslDevIfConfigEstimatedHrErrRateThreshold mandatory The value of this object corresponds to the
estimated error rate threshold value on an hourly basis.
A value of -9999 disables the threshold check. The default value
for this obj… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.11 |
| xdslDevIfConfigEstimatedDayErrRateThreshold mandatory The value of this object corresponds to the
estimated error rate threshold value on a daily basis. A
value of -9999 disables this threshold check. The default value
for this objec… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.12 |
| xdslDevIfConfigPortID mandatory The value of this object corresponds to 40 character
information only field that identifies what the DSL
port is connected to (Circuit ID, MDF location,
Customer name, etc.) | column | OctetString | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.13 |
| xdslDevIfLinkUpDownTransitionThreshold mandatory The value of this object corresponds to the threshold
value for link up-down transitions. If link up-down's exceed
this threshold value a xdslLinkupDownTransitions
trap is generat… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.14 |
| xdslDevIfConfigStartUpMargin mandatory The value of this object corresponds to the startup value
of the margin for a DSL interface (specified by ifIndex).
The unit is db (decibels. The higher the margin the better
the… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.15 |
| xdslDevIfConfigTxPowerAttenuation mandatory This value corresponds to the Transmitt Power Attenuation in dB
for the access node. This value represents the downstream power
level in dB. Permissible range of values are betwee… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.16 |
| xdslDevIfConfigSnTxPowerAttenuation mandatory This value corresponds to the Transmitt Power Attenuation in dB
for the service node. This value represents the upstream power
level in dB. The default value of this object is -6 … | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.17 |
| xdslDevIfConfigPortSpeedBehaviour mandatory The value of this object corresponds to the
behaviour of the specified port. The default
value for this object is fixed (1). | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.2 |
| xdslDevIfConfigUpFixedPortSpeed mandatory The value of this object corresponds to the upstream
speed of the specified port for fixed port speed
behaviour. All the speeds enumerated above are in kbps.
If the port speed beh… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.3 |
| xdslDevIfConfigDownFixedPortSpeed mandatory The value of this object corresponds to the downstream
speed of the specified port for fixed port speed
behaviour. All the speeds enumerated above are in kbps.
if the port speed b… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.4 |
| xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed mandatory The value of this object corresponds to the
upper bound for the upstream port speed of the specified port
for adaptive port speed behaviour. The speeds are measured
in kbps. If … | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.5 |
| xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed mandatory The value of this object corresponds to
the upper bound allowed for the downstream port speed
of the specified port for adaptive port speed
behaviour. The speeds are measured i… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.7 |
| xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed mandatory The value of this object corresponds to the
Minimum lower bound allowed for the downstream port speed
of the specified port for adaptive port speed behaviour.
If the port speed b… | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.8 |
| xdslDevIfConfigReedSolomonDownForwardErrorCorrection mandatory The value of this object corresponds to the
Reed-Solomon forward error correction in the downstream
direction. The default value of this object should be
minimizeError (1). | column | Enumeration | .1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.9 |