msdslPortConfigAllocMethod

The Current allocation method for this device.
Where:
    ds1ByPass:
	    In this mode the entire WAN interface 
	    is connected directly to the DSL interface.
	    This connection provides minimal delay.
	    Changing to this allocation method will 
	    automatically do the following assignments:
		    WAN port 1 >>> DSL Port 1
		    WAN port 2 >>> DSL Port 2
		    WAN port 3 >>> DSL Port 3
		    WAN port 4 >>> DSL Port 4
		    WAN port 5 >>> DSL Port 5
		    WAN port 6 >>> DSL Port 6
		    WAN port 7 >>> DSL Port 7
		    WAN port 8 >>> DSL Port 8
    ds1CrossConn:
	    In this mode the individual WAN ports may
	    be connected to individual DSL ports through
	    the cross connect circuitry. This connection
	    must use the System Clock for the timing
	    source.  Changing to this allocation method will
	    unassign all the time slots for this interface
	    and any time slots to the connected interface.
		For example:
		    WAN port 1 >>> DSL Port 8
		    WAN port 2 >>> DSL Port 7
		    WAN port 3 >>> DSL Port 6
		    WAN port 4 >>> DSL Port 5
		    WAN port 5 >>> DSL Port 1
		    WAN port 6 >>> DSL Port 2
		    WAN port 7 >>> Not Assigned
		    WAN port 8 >>> WAN Port 7
    ds0CrossConn:
	    This mode assigns individual time slots. Any
	    timeslot from any WAN interface may be
	    connected to any timeslot of any DSL interface.
	    Changing to this allocation method will unassign
	    all the time slots for this interface and any 
	    time slots to the connected interface.
    notAssigned:
	    This indicates that this interface is not assigned.
	    Changing to this allocation method will unassign
	    all the time slots for this interface and any 
	    time slots to the connected interface.
    disabled:
	    This is a Read Only value indicating that the 
	    interface is disabled.
              
    NOTE: Going from one mode to another mode will unassign 
          all the time slots for that interface and the 
	  interface it was connected to. 
	  The only exception being ds1ByPass mode.  When
	  going from any mode to ds1ByPass, all the Time
	  Slots will be assigned Network port to WAN port.
	  These assignments, however, do not use the cross
	  connect circuitry.

MIB

HOTWIRE-MSDSL-INTERFACE-MIB

OID

.1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.2

Type

column

Access

readwrite

Status

mandatory

Parent

msdslPortConfigAllocMethodEntry

Table

msdslPortConfigAllocMethodTable

Siblings

1