hm2L2RuleEtypeKey

HM2-FW-MIB · .1.3.6.1.4.1.248.11.79.1.6.3.1.1.6
MIB view Table view

Object

column r/w Enumeration 
The Ethertype keyword used in the Filter classification.
A keyword of custom(1) requires that the hm2L2RuleEtypeValue
object also be set.

Context

MIB
HM2-FW-MIB
OID
.1.3.6.1.4.1.248.11.79.1.6.3.1.1.6
Type
column
Access
readwrite
Status
current
Parent
hm2L2RuleEntry
Table
hm2L2RuleTable
Siblings
24

Syntax

Enumeration

Values & Constraints

Enumerated Values
1custom
2appletalk
3arp
4ibmsna
5ipv4
6ipv6
7ipxold
8mplsmcast
9mplsucast
10netbios
11novell
12pppoedisc
13rarp
14pppoesess
15ipxnew
16profinet
17powerlink
18ethercat
19ieee8021q

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2L2RuleIndex
The index of this rule instance within an Filter.
columnInteger32.1.3.6.1.4.1.248.11.79.1.6.3.1.1.1
hm2L2RuleDestIpAddr
The Destination IP address in cidr or Asset name from hm2AssetTable.
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.10
hm2L2RuleIpTosBits
The type of service (TOS) bits value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.79.1.6.3.1.1.12
hm2L2RuleSrcPort
The Source port number
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.13
hm2L2RuleDestPort
The Destination port number
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.14
hm2L2RuleAssignQueueId
Queue identifier to which all inbound packets matching L2 packet filter rule. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1…
columnUnsigned32.1.3.6.1.4.1.248.11.79.1.6.3.1.1.15
hm2L2RuleRateLimitCrate
Committed rate attribute statement value, specified in kbps. Value 0 disables this match criteria.
columnUnsigned32.1.3.6.1.4.1.248.11.79.1.6.3.1.1.16
hm2L2RuleRateLimitCburst
Committed burst size attribute statement value, specified in kbytes. Value 0 disables this match criteria.
columnHM2-PLATFORM-QOS-ACL-MIBAclBurstSize.1.3.6.1.4.1.248.11.79.1.6.3.1.1.17
hm2L2RuleRateLimitCrateUnit
The unit of the L2RuleRateLimitCrate. Can be either packets per second (pps) or kilobits per second (kbps).
columnEnumeration.1.3.6.1.4.1.248.11.79.1.6.3.1.1.18
hm2L2FwTrap
Set to true if application of this rule shall send a trap.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.248.11.79.1.6.3.1.1.19
hm2L2RuleHitCount
Number of packets that matched the L2 rule.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.248.11.79.1.6.3.1.1.2
hm2L2RuleDescription
User defined textual description related to this rule.
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.20
hm2L2RuleLog
Set to true if application of this rule shall be logged
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.248.11.79.1.6.3.1.1.21
hm2L2RuleStatsAction
Setting the object to 'flushRuleHitCount(2)' will reset hit counter statistics. Reading the object always returns 'other'.
columnEnumeration.1.3.6.1.4.1.248.11.79.1.6.3.1.1.22
hm2L2RowStatus
This is a standard row status value - active(1): The rule is active. Note that until committed, the rule will not be applied. You cannot activate the rule if an enforcer mapping…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.248.11.79.1.6.3.1.1.23
hm2L2DPIProfileIndex
The index of the DPI profile, to which this rule is assigned, depending on enforcer action. Value 0 : This rule is not assigned to any DPI Profile. You cannot assign the rule to a…
columnInteger32.1.3.6.1.4.1.248.11.79.1.6.3.1.1.24
hm2L2RuleProtoName
Following values are supported: - Protocol name from hm2ProtocolTable - icmp: internet control message protocol (RFC 792) - igmp: internet group management protocol - ipip: IP in …
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.25
hm2L2AppRuleName
Application rule name from hm2AppRuleTable
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.26
hm2L2RuleAction
The action of the corresponding rule: o accept(1): Packets matching this rule are accepted and will be forwarded o drop(2): Packets matching this rule will be silently discarde…
columnEnumeration.1.3.6.1.4.1.248.11.79.1.6.3.1.1.3
hm2L2RuleDestMacAddr
The destination MAC address used in the Filter classification or Asset name from hm2AssetTable.
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.4
hm2L2RuleSrcMacAddr
The source MAC address used in the Filter classification or Asset name from hm2AssetTable.
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.5
hm2L2RuleEtypeValue
The Ethertype custom value used in the Filter classification. This object is only valid if the hm2L2RuleEtypeKey is set to custom(1). Values ranging from 0x0600 to 0xFFFF (1536 t…
columnHM2-PLATFORM-QOS-ACL-MIBEtypeValue.1.3.6.1.4.1.248.11.79.1.6.3.1.1.7
hm2L2RuleVlanId
The VLAN ID value used in the Filter classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame which is contai…
columnInteger32.1.3.6.1.4.1.248.11.79.1.6.3.1.1.8
hm2L2RuleSrcIpAddr
The source IP address in cidr or Asset name from hm2AssetTable.
columnOctetString.1.3.6.1.4.1.248.11.79.1.6.3.1.1.9