hm2DPIProfileIEC104AdvancedTypeIDList
HM2-FW-MIB ·
.1.3.6.1.4.1.248.11.79.1.3.21.3.1.11
Object
column
r/w
OctetString
The type IDs for this enforcer as string. A type ID list has the syntax: <val> If more than one value is given for type ID list, values are separated by a , sign (comma). Note: The user can define any number between 0-255. The type ID must be a number (in decimal format). All undefined type IDs are reserved for further compatible definitions. Following type IDs are defined: 0 Invalid type id invalid-0 1 Single point information m-sp-na-1 2 Single point information with time tag m-sp-ta-1 3 Double point information m-dp-na-1 4 Double point information with time tag m-dp-ta-1 5 Step position information m-st-na-1 6 Step position information with time tag m-st-ta-1 7 Bit string of 32 bit m-bo-na-1 8 Bit string of 32 bit with time tag m-bo-ta-1 9 Measured value, normalized value m-me-na-1 10 Measured value, normalized value with time tag m-me-ta-1 11 Measured value, scaled value m-me-nb-1 12 Measured value, scaled value with time tag m-me-tb-1 13 Measured value, short floating point value m-me-nc-1 14 Measured value, short floating point value with time tag m-me-tc-1 15 Integrated totals m-it-na-1 16 Integrated totals with time tag m-it-ta-1 17 Event of protection equipment with time tag m-ep-ta-1 18 Packed start events of protection equipment with time tag m-ep-tb-1 19 Packed output circuit information of protection equipment with time tag m-ep-tc-1 20 Packed single-point information with status change detection m-ps-na-1 21 Measured value, normalized value without quality descriptor m-me-nd-1 30 Single point information with time tag cp56time2a m-sp-tb-1 31 Double point information with time tag cp56time2a m-dp-tb-1 32 Step position information with time tag cp56time2a m-st-tb-1 33 Bit string of 32 bit with time tag cp56time2a m-bo-tb-1 34 Measured value, normalized value with time tag cp56time2a m-me-td-1 35 Measured value, scaled value with time tag cp56time2a m-me-te-1 36 Measured value, short floating point value with time tag cp56time2a m-me-tf-1 37 Integrated totals with time tag cp56time2a m-it-tb-1 38 Event of protection equipment with time tag cp56time2a m-ep-td-1 39 Packed start events of protection equipment with time tag cp56time2a m-ep-te-1 40 Packed output circuit information of protection equipment with time tag cp56time2a m-ep-tf-1 45 Single command c-sc-na-1 46 Double command c-dc-na-1 47 Regulating step command c-rc-na-1 48 Setpoint command, normalized value c-se-na-1 49 Setpoint command, scaled value c-se-nb-1 50 Setpoint command, short floating point value c-se-nc-1 51 Bit string 32 bit c-bo-na-1 58 Single command with time tag cp56time2a c-sc-ta-1 59 Double command with time tag cp56time2a c-dc-ta-1 60 Regulating step command with time tag cp56time2a c-rc-ta-1 61 Setpoint command, normalized value with time tag cp56time2a c-se-ta-1 62 Setpoint command, scaled value with time tag cp56time2a c-se-tb-1 63 Setpoint command, short floating point value with time tag cp56time2a c-se-tc-1 64 Bit string 32 bit with time tag cp56time2a c-bo-ta-1 70 End of initialization m-ei-na-1 100 (General-) Interrogation command c-ic-na-1 101 Counter interrogation command c-ci-na-1 102 Read command c-rd-na-1 103 Clock synchronization command c-cs-na-1 104 ( IEC 101 ) Test command c-ts-nb-1 105 Reset process command c-rp-nc-1 106 ( IEC 101 ) Delay acquisition command c-cd-na-1 107 Test command with time tag cp56time2a c-ts-ta-1 110 Parameter of measured value, normalized value p-me-na-1 111 Parameter of measured value, scaled value p-me-nb-1 112 Parameter of measured value, short floating point value p-me-nc-1 113 Parameter activation p-ac-na-1 120 File ready f-fr-na-1 121 Section ready f-sr-na-1 122 Call directory, select file, call file, call section f-sc-na-1 123 Last section, last segment f-ls-na-1 124 Ack file, Ack section f-af-na-1 125 Segment f-sg-na-1 126 f-dr-ta-1 127 QueryLog - Request archive file f-sc-nb-1 128-135 reserved for routing of messages 136-255 reserved for special use
Context
- MIB
- HM2-FW-MIB
- OID
.1.3.6.1.4.1.248.11.79.1.3.21.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2DPIProfileIEC104Entry
- Table
- hm2DPIProfileIEC104Table
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-1400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DPIProfileIEC104Index Profile index of this DPI IEC104 profile | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.1 |
| hm2DPIProfileIEC104RowStatus This is a standard row status value:
- active(1): The profile is active. You cannot modify it.
- notInService(2): The profile is inactive because of user action.
You cannot inacti… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.10 |
| hm2DPIProfileIEC104OriginatorAddrList Allowed Originator addresses for this enforcer as string.
Allowed format for originator address list:
- index range with first and last index separated by hyphen
('10-15')
- comma… | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.12 |
| hm2DPIProfileIEC104CauseOfTransmissionSize Set to default value 2 for the latest protocol, set to 1 for legacy protocol | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.13 |
| hm2DPIProfileIEC104CommonAddressSize Set to default value 2 for the latest protocol, set to 1 for legacy protocol | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.14 |
| hm2DPIProfileIEC104IOAddressSize Set to default value 3 for the latest protocol, set to 2 or 1 for legacy protocol | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.15 |
| hm2DPIProfileIEC104AllowIEC101 Set to 'enable' if Type IDs that are defined for the old IEC 101 standard have to be allowed | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.16 |
| hm2DPIProfileIEC104Description User defined textual description related to this profile. | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.2 |
| hm2DPIProfileIEC104FunctionType The function types of the corresponding type IDs:
o readonly(1): Selects read only type IDs for the type ID list.
o readwrite(2): Selects read write type IDs for the type ID list.… | column | Enumeration | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.3 |
| hm2DPIProfileIEC104TypeIDList obsolete **NOTE: This object is obsolete in favour of hm2DPIProfileIEC104AdvancedTypeIDList.**
The type IDs for this enforcer as bit string.
Each type ID bit can either be set (allowed) or… | column | Bits | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.4 |
| hm2DPIProfileIEC104OriginatorAddressList obsolete **NOTE: This object is obsolete in favour of hm2DPIProfileIEC104OriginatorAddrList.**
Allowed Originator addresses for this enforcer as bit string.
Each bit corresponds to an orig… | column | Bits | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.5 |
| hm2DPIProfileIEC104CommonAddressList Allowed Common addresses for this enforcer as string.
Allowed format for common address list:
- index range with first and last index separated by hyphen
('10-15')
- comma separat… | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.6 |
| hm2DPIProfileIEC104SanityCheck Set to 'enable' if a sanity check including format and specification
for all packets shall be done | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.7 |
| hm2DPIProfileIEC104Reset Set to 'enable' if reset connection message shall be sent in case a packet is dropped | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.8 |
| hm2DPIProfileIEC104Debug Set to 'enable' if reset connection message shall contain debug information | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.79.1.3.21.3.1.9 |