hm2DPIProfileDnp3FunctionCodeList
HM2-FW-MIB ·
.1.3.6.1.4.1.248.11.79.1.3.21.6.1.3
Object
column
r/w
OctetString
The function codes for this enforcer as string.
A function code has the syntax:
<val>
If more than one value is given for a function code, values are
separated by a , sign (comma).
Note: The user can define any number between 0-255. The code must be a number (in decimal format).
Following function codes are defined by the DNP3 standard IEEE 1815-2012:
0 confirm
1 read
2 write
3 select
4 operate
5 direct_operate
6 direct_operate_nr
7 immed_freeze
8 immed_freeze_nr
9 freeze_clear
10 freeze_clear_nr
11 freeze_at_time
12 freeze_at_time_nr
13 cold_restart
14 warm_restart
15 initialize_data
16 initialize_appl
17 start_appl
18 stop_appl
19 save_config
20 enable_unsolicited
21 disable_unsolicited
22 assign_class
23 delay_measure
24 record_current_time
25 open_file
26 close_file
27 delete_file
28 get_file_info
29 authenticate_file
30 abort_file
31 activate_config
32 authenticate_req
33 authenticate_err
129 response
130 unsolicited_response
131 authenticate_resp
Context
- MIB
- HM2-FW-MIB
- OID
.1.3.6.1.4.1.248.11.79.1.3.21.6.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2DPIProfileDnp3Entry
- Table
- hm2DPIProfileDnp3Table
- Siblings
- 8
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-1400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DPIProfileDnp3Index Profile index of this DPI DNP3 profile | column | Integer32 | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.1 |
| hm2DPIProfileDnp3Description User defined textual description related to this profile. | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.2 |
| hm2DPIProfileDnp3DefaultWhiteList Index of entries to be included from Default White list
of objects as per DNP3 standard IEEE 1815-2012.
Allowed formats are: (Index range <1-317>)
- keyword 'none' for excluding … | column | OctetString | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.4 |
| hm2DPIProfileDnp3CrcCheck This option makes DNP3 enforcer validate the
checksum contained in dnp3 link-layer frames.
Frames with invalid checksums will be ignored | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.5 |
| hm2DPIProfileDnp3SanityCheck Set to true for which all
sanity checks shall be done | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.6 |
| hm2DPIProfileDnp3CheckOutstationTraffic Set to true to make dnp3 enforcer check packets originating at an outstation | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.7 |
| hm2DPIProfileDnp3TcpReset Set to true if apply to packets for which a reset connection
message shall be sent on ingress and egress ports | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.8 |
| hm2DPIProfileDnp3RowStatus This is a standard row status value:
- active(1): The profile is active. You cannot modify it.
- notInService(2): The profile is inactive because of user action.
You cannot inac… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.11.79.1.3.21.6.1.9 |