hm2DPIProfileAmpTcpReset

HM2-FW-MIB · .1.3.6.1.4.1.248.11.79.1.3.21.8.1.15
MIB view Table view

Object

column r/w HM2-TC-MIBHmEnabledStatus 
Enable/disable the reseting of the TCP connection. 
If it is enabled then the TCP reset connection message will 
be sent in case a packet is dropped

Context

MIB
HM2-FW-MIB
OID
.1.3.6.1.4.1.248.11.79.1.3.21.8.1.15
Type
column
Access
readwrite
Status
current
Parent
hm2DPIProfileAmpEntry
Table
hm2DPIProfileAmpTable
Siblings
15

Syntax

HM2-TC-MIBHmEnabledStatus
Source
HM2-TC-MIBHmEnabledStatus
Base type
Enumeration

Values & Constraints

Type Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2DPIProfileAmpIndex
Profile index for the DPI AMP profile.
columnInteger32.1.3.6.1.4.1.248.11.79.1.3.21.8.1.1
hm2DPIProfileAmpTaskcodedata
Specify the task code data for the DPI AMP profile. Allowed formats are: - Range with first and last task code seperated by hyphen (0004-000A). - Comma seprated task code data (…
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.10
hm2DPIProfileAmpProtectmode
Forcefully enable/disable the protect mode for the particular task code in the DPI AMP profile.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.79.1.3.21.8.1.11
hm2DPIProfileAmpEcc
Enable/disable the checking for the NITP Error Check Characters (ECC) of the packets in the DPI AMP profile.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.79.1.3.21.8.1.12
hm2DPIProfileAmpBcc
Enable/disable the checking for the CAMP Block Check Characters (BCC) of the AMP packets in the DPI AMP profile.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.79.1.3.21.8.1.13
hm2DPIProfileAmpDebug
Enable/disable the debugging in the DPI AMP profile. If it is enabled then the reset connection message will contain the debug information.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.79.1.3.21.8.1.14
hm2DPIProfileAmpSanityCheck
Enable/disable the sanity check including format and specification of all the AMP packets.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.79.1.3.21.8.1.16
hm2DPIProfileAmpRowStatus
This is a standard row status value: - active(1): The profile is active. You cannot modify it. - notInService(2): The profile is inactive because of user action. You cannot inacti…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.248.11.79.1.3.21.8.1.17
hm2DPIProfileAmpDescription
Textual description related to the DPI AMP profile.
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.2
hm2DPIProfileAmpMsgType
Specify the message type for the DPI AMP profile. This field specifies the type of data contained in the message data area and also specifies if the message is a command or a re…
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.4
hm2DPIProfileAmpAddrClass
Specify the particular type of the memory to be accessed. Allowed formats are: - keyword 'any' - Address class range with first and last class seperated by hyphen (0004-000A). …
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.5
hm2DPIProfileAmpDevClass
Specify the device class. Allowed formats are: - keyword 'any' - Device class range with first and last class seperated by hyphen (0004-000A). - Comma seperated device classes …
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.6
hm2DPIProfileAmpAddress
Specify the beginning address of the memory to be read or written. Allowed formats are: - Keyword 'any' - Memory address range with first and last address seperated by hyphen (0…
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.7
hm2DPIProfileAmpDataword
Specify the address from which the data will be read. It will only be used for the CAMP packets with the memory exchange command or response. Allowed formats are: - Keyword 'any' …
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.8
hm2DPIProfileAmpTaskcode
Specify the task code for the DPI AMP profile. Allowed formats are: - Comma seperated task code (00,03,FF).
columnOctetString.1.3.6.1.4.1.248.11.79.1.3.21.8.1.9