hm2DualRstpCstBridgeFwdDelay
HM2-DUAL-RSTP-MIB ·
.1.3.6.1.4.1.248.11.150.1.0.10
Object
scalar
r/w
Unsigned32
The MSTP bridge forward delay for the CIST. The default value is 15.
Context
- MIB
- HM2-DUAL-RSTP-MIB
- OID
.1.3.6.1.4.1.248.11.150.1.0.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hm2DualRstpCstConfigGroup
- Siblings
- 26
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 4-30
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DualRstpAdminMode The spanning tree operational status.
enable(1) - enables spanning tree operational status on the switch.
disable(2) - disables spanning tree operational status on the… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.150.1.0.1 |
| hm2DualRstpCstBridgeMaxHops The MSTP bridge max hops for the CIST. The default value is 20. | scalar | Unsigned32 | .1.3.6.1.4.1.248.11.150.1.0.11 |
| hm2DualRstpCstBridgePriority The MSTP bridge priority for the CIST. The default value is 32768. | scalar | Unsigned32 | .1.3.6.1.4.1.248.11.150.1.0.12 |
| hm2DualRstpCstBridgeTimeSinceTopologyChange The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.11.150.1.0.13 |
| hm2DualRstpCstBridgeTopChanges The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.248.11.150.1.0.14 |
| hm2DualRstpCstBridgeTopologyChangeParm The topology change parameter detected by
this bridge since the management entity was last
reset or initialized. | scalar | Enumeration | .1.3.6.1.4.1.248.11.150.1.0.15 |
| hm2DualRstpCstBridgeRootCost The cost of the path to the DualRstp root as seen from
this bridge. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.16 |
| hm2DualRstpCstBridgeRootPort The port number of the port which offers the
lowest cost path from this bridge to the DualRstp
root bridge. | scalar | OctetString | .1.3.6.1.4.1.248.11.150.1.0.17 |
| hm2DualRstpCstBridgeHoldCount The MSTP bridge hold count for the CIST. This command sets the value of
maximum bpdus that a bridge is allowed to send within a hello time window.
The default value is 6. | scalar | Unsigned32 | .1.3.6.1.4.1.248.11.150.1.0.18 |
| hm2DualRstpBpduGuardMode The spanning tree BPDU Guard Mode.
enable(1) - enables BPDU Guard Mode on the switch.
disable(2) - disables BPDU Guard Mode on the switch.
The default status is disabled. | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.150.1.0.19 |
| hm2DualRstpCstHelloTime The MSTP root port hello time for the CIST. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.2 |
| hm2DualRstpBpduFilterDefault The spanning tree BPDU Filter Mode, it enables BPDU Filter on all
edge ports.
enable(1) - enables BPDU Filter Mode on the switch.
disable(2) - disables BPDU Filter Mode on the sw… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.150.1.0.20 |
| hm2DualRstpBridgeIdentifier The bridge identifier of the DualRstp instance. | scalar | OctetString | .1.3.6.1.4.1.248.11.150.1.0.21 |
| hm2DualRstpCstBridgeDesignatedRoot The DualRstp Designated Root like in dot1dStpDesignatedRoot. | scalar | OctetString | .1.3.6.1.4.1.248.11.150.1.0.22 |
| hm2DualRstpRingOnlyMode When RSTP Ring Only Mode is enabled the switch ignores the BPDUs age on Ring Only Mode ports.
The topology change BPDUs sent on Ring Only Mode ports will have a message age of 1.
… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.150.1.0.23 |
| hm2DualRstpRingOnlyModeIntfOne Interface index of the first interface. | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.248.11.150.1.0.24 |
| hm2DualRstpRingOnlyModeIntfTwo Interface index of the second interface. | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.248.11.150.1.0.25 |
| hm2DualRstpTrapMode The spanning tree trap status.
enable(1) - enables spanning tree traps on the switch.
disable(2) - disables spanning tree traps on the switch.
The default s… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.150.1.0.26 |
| hm2DualRstpMstId Additional index for RSTP MST ID. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.27 |
| hm2DualRstpCstMaxAge The MSTP root port max age for the CIST. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.3 |
| hm2DualRstpCstRegionalRootId The MSTP regional root identifier for the CIST. | scalar | OctetString | .1.3.6.1.4.1.248.11.150.1.0.4 |
| hm2DualRstpCstRegionalRootPathCost The MSTP regional root path cost for the CIST. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.5 |
| hm2DualRstpCstRootFwdDelay The MSTP root port forward delay for the CIST. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.6 |
| hm2DualRstpCstBridgeMaxAge The MSTP bridge max age for the CIST. The default value is 20. | scalar | Unsigned32 | .1.3.6.1.4.1.248.11.150.1.0.7 |
| hm2DualRstpCstBridgeHelloTime The MSTP bridge hello time for the CIST. The default
value is 2. According to IEEE 802.1Q-REV 2005 updating
hello time is disallowed | scalar | Unsigned32 | .1.3.6.1.4.1.248.11.150.1.0.8 |
| hm2DualRstpCstBridgeHoldTime The MSTP bridge hold time for the CIST. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.11.150.1.0.9 |