hm2DevMgmtActionFlushIGS
HM2-DEVMGMT-MIB ·
.1.3.6.1.4.1.248.11.10.1.2.4
Object
scalar
r/w
Enumeration
Setting the object to 'flushIGS' will flush all dynamically learnt IGMP snooping entries. Reading the object always returns 'other'.
Context
- MIB
- HM2-DEVMGMT-MIB
- OID
.1.3.6.1.4.1.248.11.10.1.2.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hm2DeviceMgmtActionGroup
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | flushIGS |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DevMgmtActionReset Setting the object to 'reset' has the same effect as a power-on sequence (cold start)
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.1 |
| hm2DevMgmtActionFlushIeee8021AS Setting the object to 'flushIeee8021AS' will flush all IEEE8021AS related counters.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.10 |
| hm2DevMgmtActionDelayPreset Time in seconds until a reset that was triggered
over the hm2DevMgmtActionReset object is executed.
Writing a zero will cancel any scheduled reset. | scalar | Integer32 | .1.3.6.1.4.1.248.11.10.1.2.100 |
| hm2DevMgmtActionDelayCurrent If a delayed reset is scheduled this object
will decrement from the start value to zero. | scalar | Integer32 | .1.3.6.1.4.1.248.11.10.1.2.101 |
| hm2DevMgmtActionLanBypass Enable/Disable run-time LAN Bypass mode upon
software request. Run-time LAN bypass feature
ensures that traffic pass freely between interface
pairs, when system is fully up and is… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.10.1.2.102 |
| hm2DevMgmtActionSystemoffLanBypass Enable/Disable system-off LAN Bypass mode upon
software request. Systemoff LAN bypass feature
ensures that traffic pass freely between interface
pairs in the event of device failu… | scalar | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.10.1.2.103 |
| hm2DevMgmtActionFlushDnsClientCache Setting the object to 'flushDnsClientCache' will flush all DNS client cache records.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.11 |
| hm2DevMgmtActionFlushDnsCachingServerCache Setting the object to 'flushDnsCachingServerCache' will flush all DNS caching server cache records.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.12 |
| hm2DevMgmtActionFlushIpUdpHelperStats Setting the object to 'flushIpUdpHelperStats' will flush all ip udp helper statistics.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.13 |
| hm2DevMgmtActionFlushAclStats Setting the object to 'flushAclStats' will flush all acl statistics from the AgentAclRuleTable.
Setting the object to 'flushAclMacStats' will flush all acl statistics from the Age… | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.14 |
| hm2DevMgmtActionFlushLdapUserCache Setting the object to 'flushLdapUserCache' will flush all cached users from LDAP queries to an
Active Directory Server.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.15 |
| hm2DevMgmtActionFlushMgmtAccessStatistics Setting the object to 'flushMgmtAccessStatistics' will flush all management access statistics.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.16 |
| hm2DevMgmtActionFlushDiffServ Setting the object to 'flushDiffServ' will flush all diffserv tables.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.17 |
| hm2DevMgmtActionFlushFDB Setting the object to 'flushFDB' will flush the forwarding database of the switch.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.2 |
| hm2DevMgmtActionFlushARP Setting the object to 'flushARP' will flush the ARP cache.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.3 |
| hm2DevMgmtActionFlushPortStats Setting the object to 'flushPortStats' will flush all port statistics.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.5 |
| hm2DevMgmtActionFlushEmailLogStats Setting the object to 'flushEmailLogCounters' will flush all email logging statistics.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.6 |
| hm2DevMgmtActionFlushMMRP Setting the object to 'flushMMRP' will flush all MMRP counters.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.7 |
| hm2DevMgmtActionFlushMVRP Setting the object to 'flushMVRP' will flush all MVRP counters.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.8 |
| hm2DevMgmtActionFlushMSRP Setting the object to 'flushMSRP' will flush all MSRP counters.
Reading the object always returns 'other'. | scalar | Enumeration | .1.3.6.1.4.1.248.11.10.1.2.9 |