hm2DevMgmtActionFlushAclStats

HM2-DEVMGMT-MIB · .1.3.6.1.4.1.248.11.10.1.2.14
MIB view Table view

Object

scalar r/w Enumeration 
Setting the object to 'flushAclStats' will flush all acl statistics from the AgentAclRuleTable.
Setting the object to 'flushAclMacStats' will flush all acl statistics from the AgentAclMacRuleTable.
Reading the object always returns 'other'.

Context

MIB
HM2-DEVMGMT-MIB
OID
.1.3.6.1.4.1.248.11.10.1.2.14
Type
scalar
Access
readwrite
Status
current
Parent
hm2DeviceMgmtActionGroup
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1other
2flushAclStats
3flushAclMacStats

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2DevMgmtActionReset
Setting the object to 'reset' has the same effect as a power-on sequence (cold start) Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.1
hm2DevMgmtActionFlushIeee8021AS
Setting the object to 'flushIeee8021AS' will flush all IEEE8021AS related counters. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.10
hm2DevMgmtActionDelayPreset
Time in seconds until a reset that was triggered over the hm2DevMgmtActionReset object is executed. Writing a zero will cancel any scheduled reset.
scalarInteger32.1.3.6.1.4.1.248.11.10.1.2.100
hm2DevMgmtActionDelayCurrent
If a delayed reset is scheduled this object will decrement from the start value to zero.
scalarInteger32.1.3.6.1.4.1.248.11.10.1.2.101
hm2DevMgmtActionLanBypass
Enable/Disable run-time LAN Bypass mode upon software request. Run-time LAN bypass feature ensures that traffic pass freely between interface pairs, when system is fully up and is…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.10.1.2.102
hm2DevMgmtActionSystemoffLanBypass
Enable/Disable system-off LAN Bypass mode upon software request. Systemoff LAN bypass feature ensures that traffic pass freely between interface pairs in the event of device failu…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.10.1.2.103
hm2DevMgmtActionFlushDnsClientCache
Setting the object to 'flushDnsClientCache' will flush all DNS client cache records. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.11
hm2DevMgmtActionFlushDnsCachingServerCache
Setting the object to 'flushDnsCachingServerCache' will flush all DNS caching server cache records. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.12
hm2DevMgmtActionFlushIpUdpHelperStats
Setting the object to 'flushIpUdpHelperStats' will flush all ip udp helper statistics. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.13
hm2DevMgmtActionFlushLdapUserCache
Setting the object to 'flushLdapUserCache' will flush all cached users from LDAP queries to an Active Directory Server. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.15
hm2DevMgmtActionFlushMgmtAccessStatistics
Setting the object to 'flushMgmtAccessStatistics' will flush all management access statistics. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.16
hm2DevMgmtActionFlushDiffServ
Setting the object to 'flushDiffServ' will flush all diffserv tables. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.17
hm2DevMgmtActionFlushFDB
Setting the object to 'flushFDB' will flush the forwarding database of the switch. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.2
hm2DevMgmtActionFlushARP
Setting the object to 'flushARP' will flush the ARP cache. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.3
hm2DevMgmtActionFlushIGS
Setting the object to 'flushIGS' will flush all dynamically learnt IGMP snooping entries. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.4
hm2DevMgmtActionFlushPortStats
Setting the object to 'flushPortStats' will flush all port statistics. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.5
hm2DevMgmtActionFlushEmailLogStats
Setting the object to 'flushEmailLogCounters' will flush all email logging statistics. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.6
hm2DevMgmtActionFlushMMRP
Setting the object to 'flushMMRP' will flush all MMRP counters. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.7
hm2DevMgmtActionFlushMVRP
Setting the object to 'flushMVRP' will flush all MVRP counters. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.8
hm2DevMgmtActionFlushMSRP
Setting the object to 'flushMSRP' will flush all MSRP counters. Reading the object always returns 'other'.
scalarEnumeration.1.3.6.1.4.1.248.11.10.1.2.9