hmAgentPortAdminMode
HIRSCHMANN-MMP4-BASICL2-MIB ·
.1.3.6.1.4.1.248.15.1.2.13.1.6
Object
column
r/w
Enumeration
The switch's Port Admin Mode
Context
- MIB
- HIRSCHMANN-MMP4-BASICL2-MIB
- OID
.1.3.6.1.4.1.248.15.1.2.13.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hmAgentPortConfigEntry
- Table
- hmAgentPortConfigTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmAgentPortDot1dBasePort The port number of this port. | column | Integer32 | .1.3.6.1.4.1.248.15.1.2.13.1.1 |
| hmAgentPortClearStats clear stats for this port only | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.10 |
| hmAgentPortDefaultType This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by hmAgentPortType.
The set of possibl… | column | ObjectIdentifier | .1.3.6.1.4.1.248.15.1.2.13.1.11 |
| hmAgentPortType This object identifies the port type. An initial set of MAU types
are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to
new types of MAUs is managed by the IANA. If … | column | ObjectIdentifier | .1.3.6.1.4.1.248.15.1.2.13.1.12 |
| hmAgentPortAutoNegAdminStatus This object identifies the administration status of auto negotiation
for this port. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.13 |
| hmAgentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.14 |
| hmAgentPortDVlanTagMode Controls the Double Vlan Tag mode on this port.
Default is normal(2). | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.15 |
| hmAgentPortDVlanTagEthertype Configures the Double Vlan Tag Ethertype for this port.
If this object is supported, ethertype cannot be configured
globally for the switch.
Commonly used are the E… | column | Integer32 | .1.3.6.1.4.1.248.15.1.2.13.1.16 |
| hmAgentPortDVlanTagCustomerId Configures the Customer ID for the Double Vlan Tag for this port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.15.1.2.13.1.17 |
| hmAgentPortMaxFrameSizeLimit This object identifies the largest value that can be
configured for hmAgentPortMaxFrameSize | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.15.1.2.13.1.18 |
| hmAgentPortMaxFrameSize This object identifies the currently configured maximum frame size
value for this port. The maximmum value that this object can be set
to is the value of hmAgentPortMaxFrameSizeLi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.15.1.2.13.1.19 |
| hmAgentPortIfIndex The switch's Port IfIndex | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.15.1.2.13.1.2 |
| hmAgentPortVoiceVlanMode Describes and Configures the Port Voice VLAN Mode. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.20 |
| hmAgentPortVoiceVlanID Describes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID. | column | Integer32 | .1.3.6.1.4.1.248.15.1.2.13.1.21 |
| hmAgentPortVoiceVlanPriority Describes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates
that the priority is not configured. | column | Integer32 | .1.3.6.1.4.1.248.15.1.2.13.1.22 |
| hmAgentPortVoiceVlanDataPriorityMode Describes and Configures the Port Voice VLAN Data Priority Mode. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.23 |
| hmAgentPortVoiceVlanOperationalStatus Describes the Port Voice VLAN Operational Status. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.24 |
| hmAgentPortVoiceVlanDSCP Describes and Configures the Port Voice VLAN DSCP value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.15.1.2.13.1.25 |
| hmAgentPortVoiceVlanAuthMode Describes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.26 |
| hmAgentPortIanaType The switch's Port Type | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.248.15.1.2.13.1.3 |
| hmAgentPortSTPMode The switch's Port Spanning Tree Protocol Mode
STP mode values are:
dot1d (the default)
fast, indicates you want to use the fast spanning tree mode
off, indicates … | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.4 |
| hmAgentPortSTPState The switch's Port Spanning Tree Protocol State.
This object is only supported when the Dot1d Protocol is enabled. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.5 |
| hmAgentPortPhysicalMode obsolete The switch's Port Speed Mode. This is the configured physical mode.
This object is read-only for gigabit ports | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.7 |
| hmAgentPortPhysicalStatus obsolete The switch's Port Physical Speed Status. This is the current actual speed. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.8 |
| hmAgentPortLinkTrapMode If enabled, link up and link down traps will be sent for this port. | column | Enumeration | .1.3.6.1.4.1.248.15.1.2.13.1.9 |