hmMaxNumExceeded
HIRSCHMANN-GENERIC-ERROR-MIB ·
.1.3.6.1.4.1.248.16.2.3
Object
node
Max. number exceeded for {0}.
Context
- MIB
- HIRSCHMANN-GENERIC-ERROR-MIB
- OID
.1.3.6.1.4.1.248.16.2.3- Type
- node
- Status
- current
- Parent
- hmMgmtSEEErrorIDGroup
- Siblings
- 63
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmRedundancyConflict Conflict Redundancy Protocols: Cannot enable {0} because of enabled {1}. | node | - | .1.3.6.1.4.1.248.16.2.1 |
| hmGeneralConflict {0} conflicts with {1}. {2}. | node | - | .1.3.6.1.4.1.248.16.2.10 |
| hmRmonAlarmTableFullErrorReturn Alarm table full. Only {0} entries are allowed. | node | - | .1.3.6.1.4.1.248.16.2.100 |
| hmGeneralExceededRange The {0} is exceeding the range. Maximum permissable range is {1}..{2}. | node | - | .1.3.6.1.4.1.248.16.2.11 |
| hmGenericDisableConflict Cannot disable {0}, because {1} is using it. | node | - | .1.3.6.1.4.1.248.16.2.12 |
| hmRedundancyConflictPort Conflict Redundancy Protocols: Cannot enable {0} because of enabled {1} on Ring Port {2}. | node | - | .1.3.6.1.4.1.248.16.2.2 |
| hmMgmtUdpPortInUse Given UDP port is already in use. | node | - | .1.3.6.1.4.1.248.16.2.200 |
| hmMgmtTcpPortInUse Given TCP port is already in use. | node | - | .1.3.6.1.4.1.248.16.2.201 |
| hmMgmtIPAddressConflictWithMgmtIP Given IP address/netmask {0}/{1} conflicts with the management IP address/netmask. | node | - | .1.3.6.1.4.1.248.16.2.202 |
| hmMgmtIPAddressConflictWithOobIP Given IP address/netmask {0}/{1} conflicts with the out-of-band management IP address/netmask. | node | - | .1.3.6.1.4.1.248.16.2.203 |
| hmMgmtIPAddressConflictWithRouterIP Given IP address/netmask {0}/{1} conflicts with a routing interface IP address/netmask. | node | - | .1.3.6.1.4.1.248.16.2.204 |
| hmMgmtIPAddressConflictWithOobUsbIP Given IP address/netmask {0}/{1} conflicts with the out-of-band management IP address/netmask with USB connection. | node | - | .1.3.6.1.4.1.248.16.2.205 |
| hm2NetIPAddrInvalid The {0} IP address is not valid. | node | - | .1.3.6.1.4.1.248.16.2.300 |
| hm2NetIPAddrAndGateway Management IP address and gateway are not on the same subnet. | node | - | .1.3.6.1.4.1.248.16.2.301 |
| hm2NetIPAddrAndSubnet The {0} IP address and subnet mask combination is not valid. | node | - | .1.3.6.1.4.1.248.16.2.302 |
| hm2NetPrefixLengthInvalid Subnet mask must have contiguous ones and be no longer than 30 bits. | node | - | .1.3.6.1.4.1.248.16.2.303 |
| hm2VlanIdNotExists VLAN {0} does not exist. Please create VLAN {1} before using it. | node | - | .1.3.6.1.4.1.248.16.2.304 |
| hmAlreadyCreated Instance already created. | node | - | .1.3.6.1.4.1.248.16.2.4 |
| hm2NetIPv6AddressAlreadyExists Cannot add IPv6 Address because it already exists. | node | - | .1.3.6.1.4.1.248.16.2.400 |
| hm2NetIPv6ChangeEUIWhileEntryActive Cannot change IPv6 EUI flag while entry is still active. | node | - | .1.3.6.1.4.1.248.16.2.401 |
| hm2NetIPv6ChangeAddressWhileEntryActive Cannot change IPv6 address while entry is still active. | node | - | .1.3.6.1.4.1.248.16.2.402 |
| hm2NetIPv6IncorrectFamilyType Cannot insert an incorrect address type. | node | - | .1.3.6.1.4.1.248.16.2.403 |
| hm2NetIPv6EnableEUIWhilePrefixLenNot64 Cannot Enable EUI while prefix length value not equal to 64. | node | - | .1.3.6.1.4.1.248.16.2.404 |
| hm2NetIPv6ChangeAddressOrigin Cannot change address origin value. | node | - | .1.3.6.1.4.1.248.16.2.405 |
| hm2NetIPv6MaximumNumberStaticAddresses Cannot insert more than the alloted maximum number of static entries. | node | - | .1.3.6.1.4.1.248.16.2.406 |
| hm2NetIPv6IncorrectAddressLength Cannot use an IPv6 address with an incorrect length. | node | - | .1.3.6.1.4.1.248.16.2.407 |
| hm2NetIPv6AddressPrefixNotMatching Cannot add IPv6 entry if the prefix and address do not match. | node | - | .1.3.6.1.4.1.248.16.2.408 |
| hm2NetIPv6PrefixNotSupported Cannot add IPv6 entry if the used prefix is 127. | node | - | .1.3.6.1.4.1.248.16.2.409 |
| hm2NetIPv6CannotAddReservedAddress Cannot add an IPv6 reserved address. | node | - | .1.3.6.1.4.1.248.16.2.410 |
| hm2EntryLenCharset Indicates that the chosen entry name uses not allowed character(s).
Allowed are alphanumerical characters and name size from 1 to 32. | node | - | .1.3.6.1.4.1.248.16.2.411 |
| hm2UserPwdLen Indicates that the chosen password is incorrect.
Check length, policy matching. | node | - | .1.3.6.1.4.1.248.16.2.412 |
| hm2EntryNotExist User does not exist. | node | - | .1.3.6.1.4.1.248.16.2.413 |
| hm2MaxNumUserExceeded Max. number of user exceeded. | node | - | .1.3.6.1.4.1.248.16.2.414 |
| hm2NetIPv6UnreachableGatewaySubnet Cannot set the IPv6 gateway from an unreachable subnet. | node | - | .1.3.6.1.4.1.248.16.2.415 |
| hm2GenericDeleteError Indicates that the entry cannot be deleted. | node | - | .1.3.6.1.4.1.248.16.2.450 |
| hm2GenericCreateError Indicates that the entry cannot be created. | node | - | .1.3.6.1.4.1.248.16.2.451 |
| hm2GenericEntryNotExist Indicates that the entry does not exists. | node | - | .1.3.6.1.4.1.248.16.2.452 |
| hm2GenericIPv4IPv6Supported Indicates that only IPv4 or IPv6 address
types are supported. | node | - | .1.3.6.1.4.1.248.16.2.453 |
| hm2GenericMulticastAddrNotAllowed Indicates that the multicast address type is
not allowed. | node | - | .1.3.6.1.4.1.248.16.2.454 |
| hm2GenericIPAddrInvalid Indicates that the value for IP address is invalid. | node | - | .1.3.6.1.4.1.248.16.2.455 |
| hm2GenericSourcePortInvalid Indicates that the value for source port is invalid. | node | - | .1.3.6.1.4.1.248.16.2.456 |
| hm2GenericRowCommitError Indicates that the row commit process is unsuccessful. | node | - | .1.3.6.1.4.1.248.16.2.457 |
| hm2GenericDestIPAddrInvalid Indicates that the value for destination IP address is invalid. | node | - | .1.3.6.1.4.1.248.16.2.458 |
| hm2GenericDestMACAddrInvalid Indicates that the value for destination MAC address is invalid. | node | - | .1.3.6.1.4.1.248.16.2.459 |
| hm2GenericDestPortInvalid Indicates that the value for destination port is invalid. | node | - | .1.3.6.1.4.1.248.16.2.460 |
| hm2GenericSourceIPAddrInvalid Indicates that the value for source IP address is invalid. | node | - | .1.3.6.1.4.1.248.16.2.461 |
| hm2GenericSourceMACAddrInvalid Indicates that the value for source MAC address is invalid. | node | - | .1.3.6.1.4.1.248.16.2.462 |
| hm2GenericEntryInvalid Indicates that the index value is out of range or contains invalid characters. | node | - | .1.3.6.1.4.1.248.16.2.463 |
| hm2GenericInterfaceInvalid Indicates that the interface number is not valid. | node | - | .1.3.6.1.4.1.248.16.2.464 |
| hm2GenericOnlySupportsIPv4 Indicates that only IPv4 address is supported. | node | - | .1.3.6.1.4.1.248.16.2.465 |
| hm2GenericVlanIdInvalid Indicates that the vlaue of VLAN ID is invalid and
cannot be processed. | node | - | .1.3.6.1.4.1.248.16.2.466 |
| hm2GenericCommitInProgress Indicates that the row cannot be created, modified or deleted
as commit is in progress. | node | - | .1.3.6.1.4.1.248.16.2.467 |
| hm2GenericNameInvalid Indicates that the name for the index is not valid. | node | - | .1.3.6.1.4.1.248.16.2.468 |
| hm2GenericDirectionInvalid Indicates that the packet direction is invalid.
Use 'ingress', 'egress' or 'both'. | node | - | .1.3.6.1.4.1.248.16.2.472 |
| hm2GenericNameAlreadyExist Indicates that the entry with the same name already
exists. | node | - | .1.3.6.1.4.1.248.16.2.473 |
| hm2GenericMinEntryInvalid Indicates that the lower value cannot be greater than the upper value. | node | - | .1.3.6.1.4.1.248.16.2.474 |
| hm2GenericEntryExistInSharedTable Indicates that the entry with the same name already exists in shared table. | node | - | .1.3.6.1.4.1.248.16.2.475 |
| hm2GenericEntryIsReadOnly Indicates that the field is read-only. | node | - | .1.3.6.1.4.1.248.16.2.476 |
| hmRedundancyConflictFpgaPort Conflict Redundancy Protocols: Cannot enable {0} on configured ports. | node | - | .1.3.6.1.4.1.248.16.2.5 |
| hmGenericEnableConflict Cannot enable {0} because {1} is enabled. | node | - | .1.3.6.1.4.1.248.16.2.6 |
| hmRedundancyConflictPortShort Cannot enable {0} on configured ports. Reason: {1} | node | - | .1.3.6.1.4.1.248.16.2.7 |
| hmTableFullError {0} table is full. Maximum allowed: {1}. | node | - | .1.3.6.1.4.1.248.16.2.8 |
| hmFunctionNotUsableWithInterface This function cannot be used with this interface. | node | - | .1.3.6.1.4.1.248.16.2.9 |