hhmsSensorArrayMailDestinationMac

HHMSAGENT-MIB · .1.3.6.1.4.1.3854.1.2.2.1.38
MIB view Table view

Object

scalar mandatory r/w RFC1213-MIBDisplayString 
If the mail destination MAC address, either the smpt server or the gateway

Context

MIB
HHMSAGENT-MIB
OID
.1.3.6.1.4.1.3854.1.2.2.1.38
Type
scalar
Access
readwrite
Status
mandatory
Parent
hhmsSensorArrayEntry
Siblings
47

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hhmsSensorArrayHost mandatory
The Host of this sensor, this is the IP address
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.1
hhmsSensorArrayOnline mandatory
If this sensorArray is currently online
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.10
hhmsSensorArrayGoOnline mandatory
To put online enter a 1, to take offline enter a 2
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.11
hhmsSensorArrayReadInterval mandatory
How many seconds between readings of this sensor
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.12
hhmsSensorArrayReceiveTimeout mandatory
How many seconds to wait to receive data from the sensor
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.13
hhmsSensorArrayReceiveRetries mandatory
How many times to retry to receive data before giving up. A -1 means never give up trying
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.14
hhmsSensorArrayVersion mandatory
The version of this SensorArray
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.15
hhmsSensorArrayTempTable mandatory
This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a different Temperature Sensor.
table-.1.3.6.1.4.1.3854.1.2.2.1.16
hhmsSensorArrayHumidityTable mandatory
This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different Humidity Sensor.
table-.1.3.6.1.4.1.3854.1.2.2.1.17
hhmsSensorArraySwitchTable mandatory
This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor.
table-.1.3.6.1.4.1.3854.1.2.2.1.18
hhmsSensorArraySerialTable mandatory
This table contains the data for every Serial Port in the SensorArray. Each row in the table contains data for a different Serial Port.
table-.1.3.6.1.4.1.3854.1.2.2.1.19
hhmsSensorArrayUseDHCP mandatory
To use DHCP enter a 1, to use a static IP address enter a 2
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.2
hhmsSensorArrayDebug mandatory
Turn on or off debug messages
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.20
hhmsSensorArrayDebugIP mandatory
The IP address to send debug messages to
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.21
hhmsSensorArrayTrapResend mandatory
If traps for Warning or Error should be resent. Traps for Normal status are sent once
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.22
hhmsSensorArrayTrapResendInterval mandatory
How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this interval. Traps for Normal status are sent once
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.23
hhmsSensorArraySendTraps mandatory
Turn on or off the sending of traps
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.24
hhmsSensorArrayTrapDestination mandatory
The IP address of the trap destination
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.25
hhmsSensorArrayTrapCommunity mandatory
The community string of the trap destination
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.26
hhmsSensorArrayTrapDefaultGateway mandatory
If the trap destination is on another network, enter the IP address of the router
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.27
hhmsSensorArrayTrapUseDefaultGateway mandatory
If the trap destination uses the default gateway
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.28
hhmsSensorArrayTrapDestinationMac mandatory
If the trap destination MAC address
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.29
hhmsSensorArrayMAC mandatory
The MAC address of this sensor.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.3
hhmsSensorArraySendMail mandatory
Turn on or off the sending of Mail
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.30
hhmsSensorArrayMailRecpt mandatory
The email address of the Recipient
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.31
hhmsSensorArrayMailFrom mandatory
The email address of the Sender
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.32
hhmsSensorArrayMailSmpt mandatory
The IP Address of the SMPT server. Note: This must be in dotted decimal form
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.33
hhmsSensorArrayMailGateway mandatory
If the smpt server is on another network, enter the IP address of the router
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.34
hhmsSensorArrayMailUseGateway mandatory
If the mail uses the default gateway
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.35
hhmsSensorArrayMailResendInterval mandatory
How often to resend mail or Traps. Enter the number of seconds from 10 to 65535. Mail for WARNING and ERROR are resent at this interval. Mail for Normal status are sent once
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.36
hhmsSensorArrayMailMaxResend mandatory
The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.37
hhmsSensorArrayMailLastStatus mandatory
The status of the most recent attempt to send an email
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.39
hhmsSensorArraySetCommunity mandatory
The sensorArray community string used for snmp Sets
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.4
hhmsSensorArrayPowerControlTable mandatory
This table contains the Power Control features in the sensorArray.
table-.1.3.6.1.4.1.3854.1.2.2.1.40
hhmsSensorArrayPowerMonitorTable mandatory
This table contains the Power Monitor features in the sensorArray.
table-.1.3.6.1.4.1.3854.1.2.2.1.41
hhmsSensorArrayHighDriveTable mandatory
This table contains the High Current Drivers in the sensorArray.
table-.1.3.6.1.4.1.3854.1.2.2.1.42
hhmsSensorArrayCameraTable mandatory
This table contains the Camera features in the sensorArray.
table-.1.3.6.1.4.1.3854.1.2.2.1.43
hhmsSensorArrayGetCommunity mandatory
The sensorArray community string used for snmp Gets
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.5
hhmsSensorArrayTrapMailPollInterval mandatory
How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.50
hhmsSensorArraySendTestMail mandatory
Send out an email test message
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.51
hhmsSensorArrayLastSystemError mandatory
A text string containing the description of the last system error
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.52
hhmsSensorArrayDataCollectionPeriod mandatory
The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.53
hhmsSensorArrayMailTimeout mandatory
The number of seconds to wait for a timeout while sending email This can vary from 10 to 60 seconds
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.54
hhmsSensorArrayDescription mandatory
A Description of this sensorArray
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.6
hhmsSensorArrayLocation mandatory
The description of the physical location of this sensorArray
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.7
hhmsSensorArrayLastUpdate mandatory
The last time the sensorArray was read
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.8
hhmsSensorArrayStatus mandatory
The current status of this sensorArray
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.9