hh3cdeNodeConfigSapList

HH3C-SNA-DLSW-EXT-MIB · .1.3.6.1.4.1.25506.2.62.1.1.15
MIB view Table view

Object

scalar r/w OctetString 
The SAP list indicates which SAPs are allowed.
Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the next most significant
bit representing the SAP 2, to the least significant
bit of the last octet representing the SAP 254. Data
link switching is allowed for those SAPs which have
one in its corresponding bit, not allowed otherwise.
The whole SAP list has to be changed together. Changing
the SAP list affects only new circuit establishments
and has no effect on established circuits.
          
This list can be used to restrict specific partners
from knowing about all the SAPs used by DLSw on all its
interfaces (these are represented in hh3cdeIfSapList for
each interface). For instance, one may want to run NetBIOS
with some partners but not others.
          
If a node supports sending run-time capabilities exchange
messages, changes to this object should cause that action.
When to start the run-time capabilities exchange is
implementation-specific.
          
The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.

Context

MIB
HH3C-SNA-DLSW-EXT-MIB
OID
.1.3.6.1.4.1.25506.2.62.1.1.15
Type
scalar
Access
readwrite
Status
current
Parent
hh3cdeNode
Siblings
20

Syntax

OctetString

Values & Constraints

Object Constraints
range: 16-16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cdeNodeVendorID
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
scalarOctetString.1.3.6.1.4.1.25506.2.62.1.1.1
hh3cdeNodeLocalPendTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.10
hh3cdeNodeRemotePendTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.11
hh3cdeNodeSnaCacheTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.12
hh3cdeNodeExplorerTimeout
Define explorer timer.
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.13
hh3cdeNodeExplorerWaitTimeout
Define explorer waiting timer.
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.14
hh3cdeNodeMaxTransmission
The maximum retry times for TCP packet. Default value is 5.
scalarInteger32.1.3.6.1.4.1.25506.2.62.1.1.16
hh3cdeNodeMulticastStatus
Multicast support status. It is disabled by default.
scalarEnumeration.1.3.6.1.4.1.25506.2.62.1.1.17
hh3cdeNodeMulticastAddress
Multicast address. Default is 224.0.10.0. When the hh3cdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.25506.2.62.1.1.18
hh3cdeNodeResetTcpAll
Reset all TCP circuit switch. Any return value is meaningless.
scalarEnumeration.1.3.6.1.4.1.25506.2.62.1.1.19
hh3cdeNodeIpAddrType
The type of ip address: IPv4 or IPv6.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.25506.2.62.1.1.2
hh3cdeNodeStCapTcpNum
Tcp number reported in DLSw Capabilities Exchange.
scalarInteger32.1.3.6.1.4.1.25506.2.62.1.1.20
hh3cdeNodeTcpQueueMax
The max length of TCP queue.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.62.1.1.21
hh3cdeNodeLocalAddr
Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.25506.2.62.1.1.3
hh3cdeNodePriority
Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered wh…
scalarInteger32.1.3.6.1.4.1.25506.2.62.1.1.4
hh3cdeNodeInitPacingWindow
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in …
scalarpackets Integer32.1.3.6.1.4.1.25506.2.62.1.1.5
hh3cdeNodeMaxPacingWindow
Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congest…
scalarpackets Integer32.1.3.6.1.4.1.25506.2.62.1.1.6
hh3cdeNodeKeepAliveInterval
Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw t…
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.7
hh3cdeNodePermitDynamic
To accept connections from non-configured remote peer when permitDynamic is specified.
scalarEnumeration.1.3.6.1.4.1.25506.2.62.1.1.8
hh3cdeNodeConnTimeout
Define connected state timer.
scalarseconds Integer32.1.3.6.1.4.1.25506.2.62.1.1.9